Dold 0060585, EAN: 4030641605858

Dold 0060585 EH5991 AC230V 50/60Hz signaling panel

Dold 0060585 EH5991 AC230V 50/60Hz signaling panel

Lieske Part No. 1001852
Mfg Part No 0060585
EAN-Code 4030641605858
Manufacturer Dold
Here only 338,89 EUR
403,28 EUR incl. VAT

Further information for Dold 0060585 EH5991 AC230V 50/60Hz signaling panel

Technical data
Enclosure designFront panel mounting
Optical signalLED
Special featuresBus-compatible
Width96 mm
TypeEH 5991
Variant
Nominal voltageAC 230 V
VariantWithout reset buttons. RS485 Bus not isolated
The EH 5991 alarm panel from Dold is a front panel mounting device for visual display of fault messages in industrial monitoring systems. It operates at a nominal voltage of AC 230 V and is part of the INFOMASTER B fault alarm system, which can be extended via an RS485 bus. The device is used for local display of up to eight fault messages, with each message indicated by a red LED. The width is 96 mm, and the housing is designed for front panel mounting, with the front side having a protection rating of IP 64, which is dust-tight and splash-proof, making it suitable for outdoor use.

Applications

The EH 5991 alarm panel is used in production plants, machine controls, and industrial monitoring systems where rapid fault localization is required. It serves as a visual indicator for fault messages transmitted from a base module RP 5990 or an expansion module RP 5991. The display is provided by eight LED indicators, each representing one fault message input. The function is independent of the operating mode (active or standby current principle) of the inputs on the base module or expansion module.

Functions and Equipment in Detail

The device features eight red LED indicators that light up when a fault message is activated. Unlike the EH 5990 variant, the EH 5991 alarm panel is not equipped with reset buttons, making it suitable for applications where manual acknowledgment of messages is not required. The display is on the front of the device, and a replaceable label field can be used for individual customization of the display. The operating voltage is AC 230 V, and the device is designed for use in industrial environments.

Technology Explained Simply

The alarm panel is bus-capable and can be integrated into a larger fault alarm system via an RS485 bus. However, the bus is not galvanically isolated in this variant, meaning there is no electrical separation between the bus and the device. The display is provided by LED indicators that light up when a fault message is activated. The IP 64 protection rating ensures the device is protected against dust and splashing water, making it suitable for industrial environments. The width of 96 mm allows for easy installation in standard front panels.

Compatibility and Accessories

The EH 5991 alarm panel is compatible with the base module RP 5990 and the expansion module RP 5991 of the INFOMASTER B fault alarm system. It can be connected to other devices in the system via the RS485 bus to enable centralized monitoring and display of fault messages. As an accessory, the alarm sounder RK 8832 is available, which can be used for acoustic signaling of faults. The alarm panel’s display is provided by the LED indicators, which reflect the status of the connected modules.

Mounting and Installation

The device is installed in a front panel with a width of 96 mm. Mounting is done by securing it to the front panel, with electrical connections made via the appropriate terminal clamps. The address setting on the alarm panel is done using a slide switch on the rear, with the address chosen so that it does not conflict with other devices in the system. Configuration is done via the MODE" rotary switch on the base module, which must be set to "Configuration to activate configuration mode.

Advantages in Operation

The EH 5991 alarm panel enables quick and visual fault localization in industrial plants. The display is provided by eight LED indicators that light up when a fault message is activated. The IP 64 protection rating ensures high reliability in industrial environments. Integration into an RS485 bus system enables centralized monitoring and display of faults, helping to reduce production downtime. The variant without reset buttons is suitable for applications where manual acknowledgment is not required.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1001852
qrcode für Dold 0060585 EH5991 AC230V 50/60Hz signaling panel