| Technical data |
| Enclosure design | Front panel mounting |
| Optical signal | LED |
| Special features | Bus-compatible |
| Width | 96 mm |
| Type | EH 5991 |
| Variant |
| Nominal voltage | DC 24 V |
| Variant | Without reset buttons. RS485 Bus not isolated |
The EH5991 DC24V alarm panel from Dold is a front panel mounting device for visual display of fault messages in industrial monitoring systems. It serves as a display unit in the INFOMASTER B fault alarm system and indicates the status of up to eight fault alarm inputs. The device is designed for a rated voltage of
DC 24 V and is mounted in a housing with a width of 96 mm. The front side is protected to
IP 64, providing a high level of mechanical and weather-resistant protection suitable for industrial environments.
Applications
The EH5991 alarm panel is designed for integration into industrial alarm and monitoring systems, particularly in production facilities where rapid fault localization is required. It is used in conjunction with the base module RP 5990 or expansion modules RP 5991 to visually display fault alarms. The display is made via eight red LED indicators, each representing a fault alarm input. The display is designed to reflect the status of the connected module (base module or expansion module), with the module address set via a slide switch on the rear of the panel.
Functions and Equipment in Detail
The device features
8 fault alarm LEDs, which illuminate when a fault is active. Unlike the EH5990 variant, the EH5991 alarm panel is
without reset buttons, meaning manual alarm acknowledgment via the device itself is not possible. The visual alarm indication is provided exclusively through the LED display. The panel’s labeling is customizable, as it includes an
interchangeable labeling field that can be adapted to specific applications.
Technology Explained Simply
The alarm panel is
bus-capable and can be integrated into the fault alarm system via an RS485 bus. However, the bus is
not galvanically isolated, meaning there is no electrical separation between the bus and the device. Communication is achieved through address setting on the device, with the address set via a rotary switch on the base module or a slide switch on the panel itself. Fault indications are displayed in real time, with the LEDs visualizing the respective fault alarm inputs. The DC 24 V operating voltage must be supplied via a suitable power supply, as devices operating at this voltage must be galvanically isolated.
Compatibility and Accessories
The EH5991 alarm panel is specifically designed for use with the fault alarm concentrators RP 5990 and RP 5991. It can be used as a display unit for the base module RP 5990 or for the expansion module RP 5991, with the address on the panel set accordingly. Integration is achieved via the RS485 bus, with communication occurring through the set address.
Mounting and Installation
The device is designed for
front panel mounting and is installed into a 96 mm wide mounting opening. Mounting is performed on the front side of the panel, with electrical connections made via the appropriate terminal clamps. The address setting on the device is done via a slide switch on the rear, which can be switched between Base Module" and "Exp. Module. System configuration is performed during the configuration cycle, where module addresses and input logic settings (operating or resting current principle) are defined.
Operational Advantages
The visual display of faults via eight LED indicators enables quick and precise error localization. The customizable labeling of the panel supports adaptation to specific plant conditions. Integration into a bus-capable system allows for centralized monitoring and control, with real-time display. The IP 64 protection rating ensures robust functionality in industrial environments with increased contamination or moisture exposure. The use of DC 24 V as operating voltage is widely adopted in industry and enables easy integration into existing systems.