Dold 0060424, EAN: 4030641604240

Dold 0060424 semiconductor relay PH9270.91/002 AC200-480V AC40A

Dold 0060424 semiconductor relay PH9270.91/002 AC200-480V AC40A

Lieske Part No. 1001397
Mfg Part No 0060424
EAN-Code 4030641604240
Manufacturer Dold
Here only 159,72 EUR
190,07 EUR incl. VAT

Further information for Dold 0060424 semiconductor relay PH9270.91/002 AC200-480V AC40A

Technical data
Load current up to40 A
Load voltage up toAC 480 V
Number of poles1-pole
On/Off Input ControlDC
Width45 mm
TypePH 9270
Signalling outputYes
Variant
Auxiliary voltageDC 24 V
Load currentAC 40 A
Load voltageAC 200 - 480 V
Semiconductor output1-pole
VariantSwitching at zero crossing. With over current monitoring and PNP transistor output with de-energized on trip. Without heat sink
The Dold semiconductor relay PH9270.91/002 AC200-480V AC40A is a 1-pole AC semiconductor relay/contactor designed for wear-free and noiseless switching as well as monitoring of loads in industrial applications. It operates with an auxiliary voltage of DC 24 V and enables switching of load voltages in the range AC 200 to 480 V at a maximum load current of 40 A. The device is designed for zero-voltage switching, meaning that the load circuit is activated at the next zero crossing of the sinusoidal mains voltage and deactivated at the next zero crossing of the load current when the control voltage is switched off. This switching method reduces electrical interference and extends the service life of load components. The integrated load circuit monitoring detects faults such as interruptions in the load circuit, deviations of the load current from the set threshold, missing load voltage, fuse failure, or defects in the power semiconductor. Upon detection of a fault, a PNP semiconductor alarm output operating on the idle current principle is activated, suitable for connection to a control system or PLC. The status indication is provided by a dual-color LED: green indicates fault-free operation, red signals a fault condition, and off means no auxiliary voltage is present.

Applications
This semiconductor relay is suitable for use in machines and plants in the plastics and rubber industry, packaging industry, food industry, as well as in soldering systems and thermoforming machines. It is frequently used for controlling heaters, motors, valves, and lighting systems. Zero-voltage switching is particularly advantageous for inductive loads such as motors, as it minimizes switching interference. When monitoring motors, however, a start-up bypass time must be considered in the control system to avoid false alarms during start-up.

Functions and Equipment in Detail
The device features two antiparallel-connected thyristors responsible for the power switching. The DCB technology (Direct-Copper-Bonding process) ensures optimal heat dissipation and contributes to the thermal stability of the device. The width is 45 mm, enabling compact mounting on a DIN rail. The device is delivered without a heatsink, although a version with heatsink is optionally available. The integrated load circuit monitoring allows setting a load current threshold, enabling detection of over- or underloading. The status indication is provided by two LEDs: the LED “A1/A2” indicates the state of the control input (yellow = activated, off = not activated), while the LED “Alarm” indicates the operating state of the device (green = no fault, red = fault, off = no auxiliary voltage).

Technology Explained Simply
Zero-voltage switching ensures that the load circuit is switched on or off only at the zero crossing of the alternating voltage, not at any arbitrary voltage. This minimizes electrical interference and thermal stress on load components. The integrated load circuit monitoring continuously monitors load voltage and load current. If deviations from the set value or a defect in the power semiconductor occur, the alarm output is activated. The DCB technology improves heat dissipation, increasing the reliability of the device. The PNP configuration of the alarm output is directly compatible with PLC systems and enables easy integration into existing control systems.

Compatibility and Accessories
The semiconductor relay is compliant with IEC/EN 60947-4-3 and designed for use in industrial control systems. It operates with an auxiliary voltage of DC 24 V and can be connected to PLC-compatible alarm outputs (PNP). An optional version with heatsink is available, designed for mounting on a DIN rail. For thermal protection, a temperature limit switch (normally open) can be inserted into the designated slot on the underside of the device. A suitable switch is the UCHIYA type UP62 – 100, which opens at a heatsink temperature of 100 °C.

Mounting and Installation
Mounting is done on a DIN rail, with the width of 45 mm allowing for compact placement. Installation must be carried out by a qualified electrician. The connection terminals are clearly labeled: A1+/A2 for the control input, A3+/A2 for the operating voltage and load circuit monitoring, L1 for the mains connection, and T1 for the load output. The terminals are designed for secure connection with wires.

Advantages in Operation
The semiconductor relay offers wear-free and noiseless operation, increasing maintenance-free performance and service life. The integrated load circuit monitoring enables rapid fault detection, minimizing downtime. Zero-voltage switching reduces electrical interference and protects sensitive loads. The PNP configuration of the alarm output is directly compatible with PLC systems, simplifying integration into existing control systems. The DCB technology ensures efficient heat dissipation, increasing the reliability of the device in continuous operation.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1001397
qrcode für Dold 0060424 semiconductor relay PH9270.91/002 AC200-480V AC40A