Dold 0059980, EAN: 4030641599805

Dold 0059980 semiconductor contactor AC48-600V AC50A

Dold 0059980 semiconductor contactor AC48-600V AC50A

Lieske Part No. 1001596
Mfg Part No 0059980
EAN-Code 4030641599805
Manufacturer Dold
Here only 112,67 EUR
134,08 EUR incl. VAT

Further information for Dold 0059980 semiconductor contactor AC48-600V AC50A

Technical data
Load current up to125 A
Load voltage up toAC 600 V
Number of poles1-pole
On/Off Input ControlAC/DC, DC
Width45 mm
TypePH 9260
Variant
Control voltageDC 4 - 32 V
Load currentAC 50 A
Load voltageAC 48 - 600 V
Semiconductor output1-pole
VariantSwitching at zero crossing. With heat sink
The Dold semiconductor contactor PH9260.91/000/02 is an AC semiconductor relay with a single-pole semiconductor output, designed for use in industrial plants. It is used for wear-free and noiseless switching of loads in the voltage range of AC 48 to 600 V and a load current of AC 50 A. The control voltage is DC 4 to 32 V. The device is compliant with IEC/EN 60947-4-3 and is standardly configured as zero-voltage switching, meaning the switching operation occurs at the next zero crossing of the sinusoidal supply voltage. This minimizes electrical interference and extends the service life of load components. The version with a heatsink enables optimal heat dissipation and is intended for mounting on a DIN rail.

Applications
This semiconductor contactor is suitable for use in machines and plants in the plastics and rubber industry, packaging industry, soldering plants, and food processing. It is frequently used to control heating elements, motors, valves, and lighting systems. The zero-voltage switching variant is particularly suitable for applications requiring gentle and interference-free switching. The peak-voltage switching variant (optional) is specifically designed for switching transformers, as it avoids the high inrush current.

Functions and equipment in detail
The device is based on two antiparallel-connected thyristors that provide the switching function. The DCB technology (Direct-Copper-Bonding process) ensures excellent heat transfer between the semiconductor components and the heatsink. The LED status indicator signals the state of the control input. The terminal block connectors allow for secure and easy connection of wires. The shock protection class IP20 protects against contact with live parts.

Technology explained simply
Zero-voltage switching ensures that the relay only switches at the voltage zero crossing, minimizing electrical interference and increasing the lifespan of the load. The peak blocking voltage is 1200 V or 1600 V, depending on the version, and the insulation voltage is 4000 V. The maximum load current is 125 A (AC-51), with a limiting load integral value (I²t) of up to 18000 A²s. The thermal resistances are specified as 0.3 K/W (junction-to-case) and 12 K/W (case-to-ambient), describing the thermal load capacity of the device.

Compatibility and accessories
The device is designed for operation in industrial environments and meets the requirements of EMC directives (IEC/EN 61000-6-4, IEC/EN 61000-4-1). An optional over-temperature protection device is available, implemented via a temperature-limiting switch (normally open). This can be inserted into a designated pocket on the underside of the device. A suitable switch is type UP62 – 100 from UCHIYA. Mounting is on a DIN rail, with the heatsink snap-fitting into place.

Mounting and installation
Mounting is on a DIN rail using the integrated heatsink. The terminals are designed for connection with cables. The operating temperature range is -20 °C to +40 °C, and the storage temperature range is -20 °C to +80 °C. The mechanical durability is specified according to IEC/EN 60068-2-6 with an amplitude of 0.35 mm and a frequency of 10 to 55 Hz.

Advantages in operation
The semiconductor contactor provides wear-free operation, as there are no mechanical contacts. Switching operations are noiseless and allow for high switching frequencies. The integrated LED indicator facilitates diagnosis of the operating status. The DCB technology ensures efficient cooling, increasing reliability and service life. Compliance with the standard IEC/EN 60947-4-3 ensures safety and reliability in industrial applications.

The device is designed for continuous operation and meets the requirements for electromagnetic compatibility (EMC) for industrial applications (Class A according to EN 55011). When connected to a low-voltage network (Class B), interference may occur, which must be avoided by additional measures.

Batteries are not included in the delivery scope.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1001596
qrcode für Dold 0059980 semiconductor contactor AC48-600V AC50A