Dold 0059968, EAN: 4030641599683

Dold 0059968 GB9034/1111 60A AC50/60Hz 200-690V motor brake unit UH AC230V

Dold 0059968 GB9034/1111 60A AC50/60Hz 200-690V motor brake unit UH AC230V

Lieske Part No. 1001901
Mfg Part No 0059968
EAN-Code 4030641599683
Manufacturer Dold
Here only 1.996,38 EUR
2.375,69 EUR incl. VAT

Further information for Dold 0059968 GB9034/1111 60A AC50/60Hz 200-690V motor brake unit UH AC230V

Technical data
Braking current adjustable up to max.600 A
Braking time adjustable up to max.320 s
Width110 mm
TypeGB 9034
Automatic standstill monitoringYes
External brake contactor requiredYes
Signalling outputYes
Temperature monitoringYes
Variant
Auxiliary voltageAC 230 V
Braking current60 A
Nominal voltageAC 200 - 690 V
Approvals and MarkingsUKCA
VariantWide voltage input (UN = 200 ... 690 V). Brake current monitoring, thermistor-motor protection input, star-delta control and output relay for standstill indication. Brake current indicator. Removable terminals
The electronic motor brake device GB 9034 of the MINISTOP series by Dold is designed for wear-free braking of three-phase and alternating current asynchronous motors. It is used in drive systems that require reliable and controlled braking for safety or functional reasons. The device operates with DC braking via a single-phase rectifier and enables precise control of the braking process through set times or integrated standstill detection. Braking is performed via an external brake contactor, which is controlled through terminals 1–2. The supply voltage is connected to terminals L1–L2, with an auxiliary voltage of AC 230 V required when using the wide voltage range (200–690 V).

Applications
This device is designed for industrial applications, particularly in machine building, woodworking, textile industry, conveyor systems, and sawmills. It is suitable for all asynchronous motors requiring safe and rapid braking, such as in production plants where short coast-down times contribute to process safety. The integrated standstill monitoring ensures that the motor actually comes to a stop within the set braking time. If standstill is not achieved, a fault is reported via a potential-free signaling contact.

Functions and Equipment in Detail
The device features an adjustable braking time up to a maximum of 320 seconds and an adjustable braking current up to a maximum of 600 A. The braking current display allows visual monitoring of current flow. Functions include automatic standstill monitoring, a thermistor motor protection input, star/delta control, and a standstill signaling relay. The control terminals are designed for plug-in connections, facilitating connection and maintenance. The width is 110 mm, enabling compact installation in enclosures.

Technology Explained Simply
Braking is achieved by injecting a direct current into the stator winding of the motor, creating a magnetic field that slows down the rotation. The safety time between switching off the motor contactor and switching on the brake contactor prevents induced voltages from damaging the power section. The ready LED indicates that the supply voltage is present and the device is operational. Current values are displayed via LEDs, with LED 2 indicating the set current value and LED 3 indicating the actual current value. During standstill-dependent braking, LEDs 2 and 3 flash continuously when the function is activated.

Compatibility and Accessories
Integrated functions such as star-delta control, thermistor motor protection, and standstill signaling can be used depending on the variant. Control is performed via defined terminals, with terminals 6–7 handling the starter contact (normally open contact of the motor contactor) and terminals 8–9 handling the interlock for the motor contactor.

Mounting and Installation
Mounting is performed in an enclosure, with the width of 110 mm allowing placement in standard control panels. Connections are made via the designated plug-in terminals. The supply voltage is connected to L1–L2, and the auxiliary voltage (AC 230 V) to L–N. Motor connections are made to U–V–W. Terminals 1–2 control the external brake contactor. The safety time between motor contactor and brake contactor switching off is pre-set in the device to avoid inductive voltages.

Operational Advantages
The device offers higher safety through shorter coast-down times and reduced mechanical stress on drives. It is maintenance-free and wear-free, as no mechanical brakes are required. Simple integration into existing systems and the ability to individually adjust braking time and braking current increase flexibility. Automatic standstill monitoring and the signaling output enable reliable fault detection during operation. Conformity with the standard IEC/EN 60947-4-2 ensures compliance with industrial safety standards. The UKCA approval is relevant for use in the United Kingdom.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1001901
qrcode für Dold 0059968 GB9034/1111 60A AC50/60Hz 200-690V motor brake unit UH AC230V