Further information for Dold 0059786 IK9055.11/60 50-50000IPM UH=DC24V speed monitor hyst. 1-20%
Technical data
Classification
Drehzahlüberwachung
Enclosure design
Distribution board
Measuring range max.
600000 IPM
Output contacts
1 C/O contact
Width
17,5 mm
Type
IK 9055
Operate delay
Variant
Auxiliary voltage
DC 24 V
Contact equipping
1 changeover contact
Hysteresis
1 - 20 %
Setting range
50 - 50000 IPM
Start up delay
Without
Approvals and Markings
CSA C/US
Variant
Universal input, for configuration of different sensors (PNP, NPN, 2-wire, contact, voltage). Start up delay adjustable logarithmically
The Dold speed monitor IK9055.11/60 is an industrial monitoring component for speed and frequency monitoring of rotating machine parts, drives or cyclic movements. The device processes pulse signals from sensors such as proximity switches, Hall sensors or reed contacts and switches via a relay output when a set threshold value is reached. It is designed for use in production plants, conveyor and transport technology as well as in process automation, where precise monitoring of speeds or pulse sequences is required.
Applications
The speed monitor is suitable for monitoring drives in manufacturing technology, particularly for machines operated with variable speed. It can also be used for monitoring cyclic lifting movements, oscillations or pulse sequences in conveyor systems. The maximum measurement frequency of 600,000 pulses per minute (IPM) makes the device suitable for applications with high speeds, such as turbines or centrifuges. The function is independent of the sensor principle, as the universal input supports various sensor types.
Functions and equipment in detail
The device features a universal input, configurable for various sensors, including PNP and NPN sensors, 2-wire sensors, contacts and voltage signals. The input terminals (+U, X1, IN, 0 V) allow connection of different sensor types, with wiring varying according to sensor type. The auxiliary voltage is DC 24 V, with the device version supplied without start-up bypass. Monitoring is performed in the range of 50 to 50,000 IPM, with the threshold value switchable in three ranges. The hysteresis is adjustable between 1 and 20 % to avoid false alarms due to minor fluctuations.
Technology explained clearly
The frequency to be monitored is detected at the input (terminal IN) and compared with a set threshold value. In overfrequency mode, the output relay switches to alarm position as soon as the measured frequency exceeds the threshold value. If the frequency drops below the threshold value minus hysteresis, the relay returns to the normal position. In underfrequency mode, alarm is triggered when the threshold value is undershot. The return to normal position occurs when the frequency exceeds the threshold value plus hysteresis. The device operates on the standby current principle, where the relay is energized in the normal state (11-14 closed). The output contacts consist of a changeover contact, suitable for controlling auxiliary relays or signal lamps.
Compatibility and accessories
The speed monitor is suitable for use with various sensors, including SKF sensor bearings, which are widely used in machine monitoring. The input terminals are suitable for proximity switches according to IEC/EN 60947-5-2. The device version IK 9055 is designed for an auxiliary voltage of DC 24 V and has a width of 17.5 mm, enabling compact mounting on a DIN rail. Mounting is either via DIN rail or screw mounting. The CSA C/US certification confirms suitability for use in North America.
Mounting and installation
Installation is carried out by mounting on a DIN rail or via screw fastening. The connection terminals are clearly labeled, with wiring varying according to sensor type. The auxiliary voltage is connected via terminals A1 and A2. LED indicators for auxiliary voltage, sensor pulses and contact position support commissioning and diagnostics. The devices are classified according to IEC/EN 60255-1, confirming compliance with safety and functional requirements for electrical equipment in measurement and control technology.
Advantages in operation
The speed monitor offers simple and clear adjustment of monitoring values. The adjustable hysteresis minimizes false alarms due to minor fluctuations. The universal input control allows use with a wide range of sensors, increasing flexibility in application. The LED indicators facilitate diagnostics during operation. The device protects machines and produced goods by early detection of speed deviations and enables speed-dependent switching in production processes.
Approvals and markings
The device carries the CSA C/US approval, confirming compliance with safety requirements in Canada and the USA. Compliance with the standard IEC/EN 60255-1 ensures reliability and functionality in industrial applications.