Dold 0059775, EAN: 4030641597757

Dold 0059775 semiconductor contactor AC230-480V AC25A

Dold 0059775 semiconductor contactor AC230-480V AC25A

Lieske Part No. 1001525
Mfg Part No 0059775
EAN-Code 4030641597757
Manufacturer Dold
Here only 257,07 EUR
305,91 EUR incl. VAT

Further information for Dold 0059775 semiconductor contactor AC230-480V AC25A

Technical data
Analog Input Control4 - 20 mA
ApprovalsUL
Load current up to50 A
Load voltage up toAC 480 V
Number of poles1-pole
Width22,5 mm, 45 mm, 90 mm
TypeBF 9250/0_2
Temperature monitoringYes
Variant
Auxiliary voltageAC/DC 24 V
Contact equippingwithout signal contact
Control inputDC 4 - 20 mA
Load currentAC 25 A
Load voltageAC 230 - 480 V
Semiconductor output1-pole
Approvals and MarkingsUL-listed C/US
VariantSelf optimising, to achieve as short as possible control periods, suitable for infrared lamps
The Dold semiconductor contactor BF9250.91/042 is an industrial power semiconductor for pulse packet control of heating elements. It features an analogue control input and is designed for precise temperature control in production and process plants. The device operates with an auxiliary voltage of AC/DC 24 V and switches loads in the voltage range AC 230 to 480 V with a rated current of AC 25 A. Control is via a DC 4–20 mA input, enabling precise actuation of heating systems. The width is 45 mm, allowing mounting on a DIN rail. The device is compliant with IEC/EN 60947-4-2 and IEC/EN 60947-4-3 standards and carries the UL approval C/US.

Applications
This semiconductor contactor is specifically designed for controlling ohmic loads such as heating strips, infrared lamps, and other resistance heaters. The self-optimised impulse distribution with minimal cycle times ensures fast and even temperature control, particularly with infrared lamps. The zero-voltage switching function reduces electrical interference and prevents sparking during switching. Applications are in industrial environments where disturbance-free and precise temperature control is required.

Functions and equipment in detail
The device features an LED display indicating the operating status visually: green LED for auxiliary voltage, yellow LED for output status, and red LED for alarms. The red LED lights up in case of a synchronisation error, control input fault, or overtemperature of the power semiconductor. The overtemperature alarm is latching and requires a brief interruption of the supply voltage to reset. A varistor protection safeguards the device against voltage surges. The temperature protection function of the power semiconductor prevents damage in case of overload.

Technology explained simply
Pulse packet control (Burst Firing) switches the load in short, regulated pulses, achieving precise temperature control. Zero-voltage switching ensures the switch only operates at the zero crossing of the AC voltage, minimising network interference. Control is via a DC 4–20 mA input, with output power varying proportionally to the input signal. Resolution is 5 %, enabling fine adjustment of power. Maximum load voltage is AC 480 V, maximum load current is AC 50 A, with the device exhibiting a current derating factor from 40 °C.

Compatibility and accessories
The device is designed for mounting on a DIN rail and can be integrated into standard enclosures. It is compatible with control devices featuring a DC 4–20 mA output. The terminal connections are designed for wiring, with terminal markings A1 (+), A2 (–), X1 (control input), L1/N (mains connection), and T1/N (load output). Operating temperature is between 0 and 40 °C, with a maximum ambient temperature of 60 °C, at which point current derating occurs.

Mounting and installation
Mounting is on a DIN rail, with recommended clearances of 20 mm above and below and 10 mm to the left and right to ensure adequate cooling. The terminal connections are designed for cable connections. Supply voltage is AC/DC 24 V, with current consumption under 26 mA at DC 24 V. Installation is in enclosed enclosures to ensure electrical safety.

Advantages in operation
The semiconductor contactor provides noiseless and fast switching, extending the life of heating elements and increasing operational safety. Precise temperature control enables high process accuracy. Integrated fault diagnosis via LED indicators simplifies maintenance and troubleshooting. Zero-voltage switching reduces electromagnetic interference and prevents sparking. The UL approval C/US ensures suitability for use in the USA and Canada.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1001525
qrcode für Dold 0059775 semiconductor contactor AC230-480V AC25A