Dold 0059709, EAN: 4030641597092

Dold 0059709 GF9016 3AC50/60Hz 400V 7,5kW soft starter

Dold 0059709 GF9016 3AC50/60Hz 400V 7,5kW soft starter

Lieske Part No. 1002141
Mfg Part No 0059709
EAN-Code 4030641597092
Manufacturer Dold
Here only 494,24 EUR
588,15 EUR incl. VAT

Further information for Dold 0059709 GF9016 3AC50/60Hz 400V 7,5kW soft starter

Technical data
Extra functionsMains monitoring, Temperature monitoring
For three-phase motors, 400 V up to22 kW
Load voltage up to3AC 400 V
Width45 mm, 52,5 mm
TypeGF 9016
Signalling outputYes
Variant
Auxiliary voltageWithout
Mains / motor voltage3AC 400 V
Nominal motor power7,5 kW
Approvals and MarkingsUKCA
The Dold GF9016 is an electronic soft start and soft stop device for three-phase asynchronous motors. It is designed for controlled start-up and shut-down of motors to reduce mechanical stress and extend the service life of drive components. The device is rated for a supply/motor voltage of 3AC 400 V and supports motor powers up to 22 kW, with the variant described here configured for a rated power of 7.5 kW. It complies with the standard IEC/EN 60947-4-2 and is certified with UKCA approval.

Applications
This device is suitable for drives with gear, belt, or chain transmission, for example in conveyor belts, fans, pumps, compressors, woodworking machines, centrifuges, packaging machines, and door drives. It is particularly used where a smooth start-up and gentle braking are required to minimize mechanical stress and wear.

Functions and Features in Detail
The GF9016 achieves soft start-up through phase-cut control using power semiconductors (thyristors) that influence two motor phases. This allows currents and motor torque to increase gradually, ensuring a jerk-free start. After start-up, the power semiconductors are bypassed via an internal relay to minimize power losses in the device. The soft stop function extends the natural coast-down time to avoid abrupt stopping of the drive. Adjustment options include separate regulation of start-up and shut-down times, as well as start-up voltage, with an optional kick-start function available.

Technology Explained Simply
Control is achieved via a 2-phase motor drive, with the third phase directly bypassed. The device electronics operate without auxiliary voltage, simplifying installation. The width is 45 mm for motors up to 15 kW and 52.5 mm for motors up to 22 kW, allowing space-saving integration into enclosures. Network monitoring and temperature monitoring ensure safe operation. An alarm output enables display of operating states and faults. Device indicators include a green LED for ready-to-operate status and a yellow LED that displays fault codes via defined flashing patterns in case of faults.

Compatibility and Accessories
The device is designed for 3-phase motors with a voltage of 3AC 400 V and supports motor powers up to 22 kW. W3 wiring is possible, enabling flexible integration into existing systems. The connection terminals are provided for supply voltage, motor connections, as well as signals such as Start/Stop, Kickstart, 0 V, alarm outputs, and +24 V output (for variants with wide voltage range).

Mounting and Installation
Mounting is carried out in standard enclosures. The width of 45 mm (up to 15 kW) or 52.5 mm (up to 22 kW) enables space-saving installation. The connection terminals are clearly labeled, with signals X1 to X8 designated for control and diagnostics. The devices are designed for industrial environments and require no additional auxiliary voltage.

Operational Advantages
By reducing start-up currents, the supply network is relieved. The gentle start-up and shut-down control reduces wear on motors and mechanical drive components, increasing service life. Simple installation and space-saving design facilitate integration into existing systems. Integrated network and temperature monitoring, as well as fault diagnosis via LED flashing patterns, support reliable operation.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1002141
qrcode für Dold 0059709 GF9016 3AC50/60Hz 400V 7,5kW soft starter