| Technical data |
| Diameter | 105 mm, 140 mm, 210 mm |
| For relay type | RN 5883 |
| Type | ND 5018 |
| Variant |
| Variant | 140 mm inner diameter |
The Dold ND5018/140 is a
differential current transformer of the ND 5018 series, specifically designed for use in industrial switching installations. It is used for measuring and monitoring differential currents, particularly in connection with residual current protection systems. The ND5018/140 variant features an
inner diameter of 140 mm, making it suitable for mounting around cables or cable bundles with a corresponding cross-section. The transformer is intended as a replacement part or addition to existing installations, particularly for devices of type
RN 5883, with which it is compatible.
Applications
The differential current transformer ND5018/140 is used in industrial electrical installations where precise detection of differential currents is required. This includes applications in machine and plant engineering, manufacturing technology, and safety systems based on residual current detection. It is typically installed in switching installations in combination with residual current protection devices or monitoring systems to detect electrical disturbances or leakage currents.
Functions and Equipment in Detail
The transformer detects the differential current flowing between the supply and return sides of an electrical system. This value is transmitted to a higher-level device, such as a residual current circuit breaker or control system. The design allows for mounting around conductors with an inner diameter of 140 mm, with other diameters (105 mm, 210 mm) also available within the ND 5018 series. The specific ND5018/140 version is therefore designed for cable bundles or individual conductors with a maximum diameter of 140 mm.
Technology Explained Simply
A
differential current transformer measures the difference between the current entering an electrical device and the current leaving it. In an ideal system, this difference is zero. Deviations indicate residual currents, for example due to insulation faults or contact with earthed parts. The ND5018/140 transformer converts this differential current into a proportional measurement signal that can be evaluated by a monitoring device. The technology is based on a transformer principle, where the conductor acts as the primary winding and the secondary winding generates the measurement signal.
Compatibility and Accessories
The differential current transformer ND5018/140 is specifically designed for use with the device type
RN 5883. It is part of the
ND 5018 series, which includes various variants with different inner diameters. Compatibility with RN 5883 ensures direct integration into existing switching installations without requiring additional modifications.
Mounting and Installation
Mounting is done by clamping around the conductor or cable bundle to be monitored, with an inner diameter of 140 mm. The transformer is designed to be installed without additional tools or connections, with detailed installation instructions found in the respective plant manual or technical documentation for the RN 5883 device. Installation typically takes place in switch cabinets or distribution cabinets, where it is directly connected to the monitoring system.
Advantages in Operation
The use of the Dold ND5018/140 enables continuous monitoring of differential currents, supporting early detection of electrical faults and preventing damage or hazards caused by leakage currents. The robust construction and specific design for the RN 5883 device ensure reliable and maintenance-friendly integration into existing industrial installations. The availability in various inner diameters (105 mm, 140 mm, 210 mm) offers flexibility in selecting the appropriate variant for different cable cross-sections.