Dold 0059561, EAN: 4030641595616

Dold 0059561 speed-stop monitor ACDC24V

Industrial Material > Industrial relays and contactors > Switching units / measuring, control relay

Dold 0059561 speed-stop monitor ACDC24V

Lieske Part No. 1321050
Mfg Part No 0059561
EAN-Code 4030641595616
Manufacturer Dold
Here only 511,59 EUR
608,79 EUR incl. VAT

Further information for Dold 0059561 speed-stop monitor ACDC24V

Technical data
1- / 2-channel2
ApprovalsUL
Cat. / PL acc. to EN ISO 13849-13/e
ClassificationFor initiators
Forcibly guided output contacts max.1 NC contact, 2 NO contacts
SIL CL acc. to IEC/EN 620613
SIL acc. to IEC/EN 620613
Thermal current Ith max.4 A
Width45 mm
TypeBH 5932
Variant
Contact equipping2 NO contacts, 1 NC contact
Nominal voltageAC/DC 24 V
Response value5 - 10500 IPM
Approvals and MarkingsUL-listed C/US, TÜV, CCC
VariantWith sensor detection. PNP-input. Adjustable setting value channel 1 and 2 together adjustable with fine tuning to synchronise both channels
The Dold speed monitor BH5932.22/113/61 is a safety-relevant monitoring switch for continuous monitoring of rotational and linear movements in machines and plants. It prevents hazards caused by moving machine parts and ensures the safe operation of drives. The device is designed for use in industrial environments and meets high requirements for safety functions.

Applications

The BH5932 is used in plants where safe speed monitoring is required, for example in packaging, conveying technology, wood processing, or metalworking. It monitors the speed of motors, shafts, or other moving parts and responds if the set trigger value is undershot or overshot. The application is particularly in systems certified according to standards EN ISO 13849-1 and IEC/EN 62061 to ensure the safety of employees and machines.

Functions and equipment in detail

The device features a 2-channel design, with both channels being adjustable together. The trigger value ranges from 5 to 10500 IPM (impulses per minute), allowing flexible adaptation to different drive speeds. The inputs are designed for pnp proximity switches, with npn variants optionally available. A special feature is the initiator connection detection, which ensures that the connection to the proximity switch is intact. The output contacts are fail-safe, consisting of 2 NO contacts and 1 NC contact, ensuring safe signal transmission.

Technology explained simply

The BH5932 operates with a nominal voltage of AC/DC 24 V and is designed for use in industrial control systems. The contacts are designed to carry a thermal current of up to 4 A. The switching simultaneity of the channels can be optimized via fine adjustment to ensure precise synchronization. The width is 45 mm, enabling compact mounting in standard control panels. The device class is designed for initiators, meaning it can be directly connected to proximity switches.

Compatibility and accessories

The device is compatible with various proximity switches from the NA 5001, NA 5002, NA 5005, and NA 5010 series. The connection combinations are described in detail in the datasheet, with the use of pnp or npn switches varying depending on the device type. The connection terminals allow the connection of stranded wires with cross-sections up to 2.5 mm², and also support the use of ferrules and plastic collars according to DIN 46 228-1/-2/-3/-4. The connection is made via terminals In A / In B for the inputs and the output contacts for controlling external loads.

Mounting and installation

Mounting is done in standard control panels with a width of 45 mm. The connection terminals are designed for stranded wire connections, with maximum cross-sections and used ferrules specified in the datasheet. The devices are designed for use in industrial environments and meet requirements for mechanical stability and electrical safety. Installation is carried out according to the provisions of the respective standards and manufacturer instructions.

Advantages in operation

The BH5932 offers high safety performance with Category 3 and Performance Level e according to EN ISO 13849-1, as well as SIL 3 according to IEC/EN 62061. The fail-safe contacts ensure reliable signal transmission, even in the event of disturbances. The adjustable switching simultaneity enables precise synchronization of the channels. The initiator connection detection increases system reliability by ensuring the connection to the proximity switch is intact. The compact design and standard nominal voltage of 24 V facilitate integration into existing control systems.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1321050
qrcode für Dold 0059561 speed-stop monitor ACDC24V