Further information for Dold 0059483 semiconductor contactor AC230-480V AC25A
Technical data
Analog Input Control
4 - 20 mA
Approvals
UL
Load current up to
50 A
Load voltage up to
AC 480 V
Number of poles
1-pole
Width
22,5 mm, 45 mm, 90 mm
Type
BF 9250/0_2
Temperature monitoring
Variant
Auxiliary voltage
AC/DC 24 V
Contact equipping
without signal contact
Control input
DC 0 - 10 V
Load current
AC 25 A
Load voltage
AC 230 - 480 V
Semiconductor output
1-pole
Approvals and Markings
UL-listed C/US
Variant
Self optimising, to achieve as short as possible control periods, suitable for infrared lamps
The Dold semiconductor contactor BF9250.91/042 is a single-pole, zero-voltage switching device for pulse packet control of heating elements. It is operated with an auxiliary voltage of AC/DC 24 V and features a control input for DC 0–10 V. The device is designed for load voltages in the range AC 230–480 V and a load current of AC 25 A. It is particularly suitable for precise temperature control in industrial applications, where self-optimized pulse distribution enables minimized cycle times – a feature especially advantageous for controlling infrared lamps.
Applications
This device is used in industrial heating systems where precise and disturbance-free temperature control is required. It is suitable for applications with resistive loads, such as heating rods, heating plates, or infrared radiators. The zero-voltage switching ensures that the switch operates at the zero crossing of the mains voltage, minimizing electrical interference and noise. The width is 45 mm, corresponding to the rated load of 25 A.
Functions and Equipment in Detail
The semiconductor contactor features an analog control input, which can be operated either as a voltage input (DC 0–10 V) or as a current input (DC 4–20 mA). Additionally, a potentiometric input with a resistance range of 0–10 kΩ is possible. Control is achieved via pulse packet control, where pulses are self-optimized to ensure short cycle times. The output power can be varied in steps of 5 %, enabling fine adjustment to the desired temperature. LED indicators signal the operating status: green LED for auxiliary voltage, yellow LED for output status, and red LED for alarms.
Technology Explained Simply
The zero-voltage switching ensures that the switch only operates at the zero crossing of the alternating voltage, increasing the lifespan of the semiconductors and reducing electromagnetic interference. The varistor protection circuit protects the device against overvoltages. The temperature protection function of the power semiconductors prevents overheating and shuts off the device at critical temperatures. The LED indicators allow for quick visual diagnosis of operating states and faults. In case of a synchronization error, a control input fault, or semiconductor overheating, the LEDs light up accordingly – in case of overheating, the red LED remains activated until the supply voltage is briefly switched off and then switched back on.
Compatibility and Accessories
The device complies with IEC/EN 60947-4-2 and IEC/EN 60947-4-3 standards and carries UL certification for use in the USA and Canada. It is mountable on a DIN rail and can be installed in enclosures with appropriate spacing (minimum 20 mm above/below, 10 mm left/right). The load voltage reaches up to AC 480 V, and the load current up to AC 50 A – however, the specified variant is designed for 25 A. Control is performed via analog signals, where input parameters (voltage, current, resistance) can be flexibly combined.
Mounting and Installation
The device is clipped onto a DIN rail. The connection terminals are clearly labeled: A1 (+) and A2 (–) for auxiliary voltage, X1 for the control input, L1/N for mains connections, and T1/N for load outputs. Installation is carried out in a closed enclosure, ensuring recommended spacing is maintained to ensure sufficient cooling. The operating temperature range is between 0 °C and 40 °C; at higher temperatures, current derating occurs. The maximum air humidity is 75 %, without condensation.
Advantages in Operation
The semiconductor contactor offers fast, noiseless switching without mechanical contacts, increasing lifespan and reducing maintenance. The pulse packet control enables precise temperature regulation, with self-optimized pulse distribution ensuring short cycle times and rapid response to load changes. The integrated temperature protection function and LED indicators enhance operational safety. Compatibility with various control signals (voltage, current, potentiometer) makes the device flexible for use in different control loops.