Dold 0059388, EAN: 4030641593889

Dold 0059388 GB9034/1101 200A AC50/60Hz 200-690V motor brake unit UH AC230V

Dold 0059388 GB9034/1101 200A AC50/60Hz 200-690V motor brake unit UH AC230V

Lieske Part No. 1001897
Mfg Part No 0059388
EAN-Code 4030641593889
Manufacturer Dold
Here only 2.595,42 EUR
3.088,55 EUR incl. VAT

Further information for Dold 0059388 GB9034/1101 200A AC50/60Hz 200-690V motor brake unit UH AC230V

Technical data
Braking current adjustable up to max.600 A
Braking time adjustable up to max.320 s
Width110 mm
TypeGB 9034
Automatic standstill monitoringYes
External brake contactor requiredYes
Signalling outputYes
Temperature monitoringYes
Variant
Auxiliary voltageAC 230 V
Braking current200 A
Nominal voltageAC 200 - 690 V
Approvals and MarkingsUKCA
VariantWide voltage input (UN = 200 ... 690 V). Brake current monitoring, thermistor-motor protection input, star-delta control and output relay for standstill indication. Removable terminals
The electronic motor brake device GB 9034 of the MINISTOP series by Dold is designed for wear-free braking of three-phase and alternating current asynchronous motors. It is intended for drives that must be reliably braked for safety and functional reasons. The device enables precise control of the braking process via adjustable parameters and integrated monitoring functions. The variant GB9034/1101 is designed for a braking current of 200 A and operates in the voltage range of AC 200 to 690 V. The auxiliary voltage is AC 230 V, which is required for controlling the device.

Applications
The motor brake device is suitable for industrial applications such as sawmills, centrifuges, woodworking machines, textile machines, and conveyor systems. It is used where short coast-down times and safe stopping of the motor are required. The device variant with wide voltage range (200–690 V) enables flexible integration into existing installations with different nominal voltages.

Functions and Equipment in Detail
The device operates with DC braking via a single-phase rectifier and generates a braking current applied to the stator winding of the motor via terminals U and V. The braking time is adjustable up to a maximum of 320 seconds, after which the braking current is switched off either at the end of the set time or upon detection of motor standstill. The automatic standstill monitoring monitors the motor status and switches off the braking current as soon as the motor stops. In case of standstill-dependent braking, a potential-free alarm contact signals if the motor has not come to a stop within the maximum braking time.

Technology Explained Simply
Braking is achieved by switching on an external brake contactor, which is controlled via terminals 1–2. The timing between switching off the motor contactor and switching on the brake contactor ensures that short-term induction voltages do not damage the power section. The braking current strength is adjustable up to 600 A, with the variant specified here having a rated value of 200 A. Temperature monitoring is performed via an optional thermistor motor protection input (terminals Z3, Z4), which can detect overheating conditions. The width of the device is 110 mm, enabling compact mounting in enclosures.

Compatibility and Accessories
The device is suitable for all asynchronous motors and can be integrated into existing installations. It supports various control variants, including star-delta control (via terminals 43/44 and 43/45) and control of an external brake contactor. The control terminals are plug-in, facilitating connection and replacement. Certification according to IEC/EN 60947-4-2 ensures compliance with standards for electrical equipment. The device bears the UKCA mark, confirming conformity with British requirements.

Mounting and Installation
The supply voltage is connected to terminals L1–L2, with the interlock contact for the motor contactor closed via terminals 8–9. The auxiliary voltage (AC 230 V) is required for the wide voltage version. The connection terminals are clearly labeled, with terminals 6–7 controlling the starter contact (normally open contact of the motor contactor) and terminals 1–2 controlling the external brake contactor. The ready LED indicates that the supply voltage is present and the device is operational.

Advantages in Operation
The motor brake device offers higher safety through shorter coast-down times and reduces wear on mechanical braking components. The maintenance-free operation and easy integration into existing installations increase cost-effectiveness. Adjustable parameters such as braking current and braking time allow application-specific adaptation. The integrated standstill monitoring and alarm output ensure reliable monitoring of the motor's status.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1001897
qrcode für Dold 0059388 GB9034/1101 200A AC50/60Hz 200-690V motor brake unit UH AC230V