Dold 0059371, EAN: 4030641593711

Dold 0059371 GB9034/1101 motor brake unit 60A AC50/60Hz

Dold 0059371 GB9034/1101 motor brake unit 60A AC50/60Hz

Lieske Part No. 1151051
Mfg Part No 0059371
EAN-Code 4030641593711
Manufacturer Dold
Here only 1.709,32 EUR
2.034,09 EUR incl. VAT

Further information for Dold 0059371 GB9034/1101 motor brake unit 60A AC50/60Hz

Technical data
Braking current adjustable up to max.600 A
Braking time adjustable up to max.320 s
Width110 mm
TypeGB 9034
Automatic standstill monitoringYes
External brake contactor requiredYes
Signalling outputYes
Temperature monitoringYes
Variant
Auxiliary voltageAC 230 V
Braking current60 A
Nominal voltageAC 200 - 690 V
Approvals and MarkingsUKCA
VariantWide voltage input (UN = 200 ... 690 V). Brake current monitoring, thermistor-motor protection input, star-delta control and output relay for standstill indication. Removable terminals
The electronic motor brake device GB 9034 of the MINISTOP series by Dold is a device for wear-free braking of three-phase and alternating current asynchronous motors. It is used for safe and functional braking of drives that must be reliably brought to a standstill for safety or operational reasons. The device operates with DC braking via a single-phase rectifier and is designed for a braking current of 60 A, with the current value adjustable up to 600 A. The rated voltage is in the range of AC 200 to 690 V, with the auxiliary voltage being AC 230 V. The width is 110 mm, and the device complies with the standard IEC/EN 60947-4-2. The UKCA approval is indicated.

Applications
This brake device is suitable for industrial drives, particularly in systems such as sawmills, centrifuges, woodworking machines, textile machines, and conveyor systems. It enables shorter coast-down times, increasing safety and improving cost-efficiency. The application is in systems where a reliable and controlled motor stop is required, such as during emergency shutdowns or within automation systems.

Functions and Equipment in Detail
The device features automatic standstill monitoring, which monitors the motor status and ends the braking process accordingly. In case of standstill-dependent braking, a potential-free signaling contact indicates if the motor has not come to a stop within the maximum braking time of 320 seconds. The braking time is adjustable and can reach up to 320 seconds. An external brake contactor is required, as the device does not integrate a brake contactor for this power rating. The control terminals are plug-in, facilitating connection and replacement.

Technology Explained Simply
The braking function is achieved through DC braking, where the stator winding of the motor is supplied with DC voltage via a single-phase rectifier. This results in controlled braking of the motor. The timing of the brake contactor is adjusted to ensure a safety time interval between switching off the motor contactor and switching on the brake contactor. This prevents induced voltages from damaging the power section. The braking current strength can be adjusted via the terminals, with a maximum value of 600 A.

Compatibility and Accessories
The device is suitable for all asynchronous motors and can be integrated into existing systems. It optionally offers functions such as star-delta starting, thermistor motor protection input, and standstill signaling relay. The star-delta starting function enables a gentle motor start, while the thermistor motor protection input supports motor temperature monitoring. The standstill signaling relay function monitors motor standstill and can issue a fault signal in case of malfunction.

Mounting and Installation
The supply voltage is connected to terminals L1 and L2. The ready LED indicates that the supply voltage is present. The motor is started via a START button. The DC braking voltage is taken from terminals U and V. The external brake contactor is controlled via contact 1/2. The interlock contacts 8/9 ensure safe coordination with the motor contactor. Terminal designations and functions are detailed in the data sheet.

Advantages in Operation
The device is wear-free and maintenance-free, reducing operating costs. Simple installation and integration into existing systems reduce mounting time. Automatic standstill monitoring increases operational safety, as incomplete braking processes are detected and signaled. The adjustable braking time and adjustable braking current allow application-specific adjustment of braking behavior. The integrated temperature monitoring via the thermistor motor protection input protects the motor from overheating.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1151051
qrcode für Dold 0059371 GB9034/1101 motor brake unit 60A AC50/60Hz