Dold 0059265, EAN: 4030641592653

Dold 0059265 semiconductor contactor 3xAC5A

Dold 0059265 semiconductor contactor 3xAC5A

Lieske Part No. 1001481
Mfg Part No 0059265
EAN-Code 4030641592653
Manufacturer Dold
Here only 245,78 EUR
292,48 EUR incl. VAT

Further information for Dold 0059265 semiconductor contactor 3xAC5A

Technical data
ApprovalsUL
Load current up to50 A
Load voltage up toAC 480 V
Number of poles1-pole, 2-pole, 3-pole
On/Off Input ControlDC
Width22,5 mm, 45 mm, 90 mm
TypeBF 9250/_ _8
Variant
Auxiliary voltageDC 9 - 32 V
Contact equippingwithout signal contact
Load current3 x AC 5 A
Load voltageAC 24 - 480 V
Semiconductor output3-pole
Approvals and MarkingsUL-listed C/US
VariantImmediate switching
The Dold semiconductor contactor BF9250.93/018 is a semiconductor contactor designed for use in industrial plants, intended for the frequent and noiseless switching of loads such as heaters, motors, valves, and lighting. The device features a 3-pole semiconductor output and is controlled by an auxiliary voltage in the range DC 9–32 V. It is designed for operation with AC loads up to 480 V and allows a load current of 3 x AC 5 A. The variant is instantaneous switching, meaning switching operations occur without waiting for the zero crossing. The devices comply with standards IEC/EN 60947-4-2 and IEC/EN 60947-4-3 and are UL-listed C/US certified, confirming compliance with safety and performance requirements in the USA and Canada.

Applications
The semiconductor contactor is suitable for applications requiring disturbance-free and quiet operation, for example in manufacturing automation, building automation, or process control. It is frequently used to switch electrical loads in continuous operating cycles without stressing mechanical contacts. The noiseless switching is particularly advantageous in environments where vibrations or noise would be disruptive. The DIN rail mounting enables easy integration into existing enclosures.

Functions and equipment in detail
The device features an electronic control supplied via terminals A1/A2 with a DC voltage in the range 9–32 V. Load terminals T1, T2, and T3 are intended for connection to the load to be switched. The on-delay and off-delay is ≤ 1 ms plus 1/2 period, with the 1/2 period being omitted for the instantaneous switching variant. The minimum load current is AC 40 mA, enabling switching even at low loads. The peak blocking voltage is ± 1200 Vp, ensuring high insulation strength. The protection circuit using varistors provides protection against transient overvoltages. The green LED lights up when voltage is applied to terminals A1/A2 and serves as an operational indicator.

Technology explained simply
The semiconductor contactor operates without mechanical contacts, using semiconductor components (e.g. triacs) for current conduction. This eliminates mechanical wear, increasing service life and operational reliability. Switching is instantaneous, meaning the load is switched on immediately after the control impulse, without waiting for the AC voltage zero crossing. This is particularly beneficial for applications requiring fast response. The power loss is calculated using the formula P = 1.2 [V] x Ieff. [A] / k [W], where k is the form factor (1.11 for sinusoidal current). The short-circuit current withstand capability is 400 A at t=10 ms for the 3-pole variant.

Compatibility and accessories
The device is available in various widths (22.5 mm, 45 mm, 90 mm) and can be supplied in different versions with different heatsinks depending on power requirements and cooling needs. The load voltage ranges include AC 24–240 V and AC 24–480 V, with a frequency of 50/60 Hz. The maximum ambient temperature is 40 °C, with current derating required at higher temperatures. The current derating from 40 °C is 0.2 A/°C for the 3-pole variant without heatsink. The approvals include UL-listed C/US, enabling use in the USA and Canada. For protection circuitry, varistors with a voltage rating of AC 510 V are specified.

Mounting and installation
The semiconductor contactor is designed for snap-on mounting on DIN rail, enabling quick and secure installation in enclosures. The mounting orientation is horizontal, and the rated operating mode is continuous duty. The storage temperature ranges from -20 °C to +80 °C. The clearance and creepage distances correspond to pollution degree 3 and a rated impulse withstand voltage of 4 kV according to IEC 60664-1. The EMC requirements comply with standards IEC/EN 61000-6-4 and IEC/EN 61000-6-1, with electromagnetic compatibility against electrostatic discharge (ESD) at 8 kV (air) / 6 kV (contact).

Advantages in operation
The semiconductor contactor offers high operational reliability through noiseless switching and long service life due to the absence of mechanical contacts. The electronic control enables precise and reliable switching function. The DIN rail mounting and clear terminal marking simplify installation and maintenance. The UL-listed C/US approval extends the application range to international markets. The protection circuit with varistors increases reliability during transient voltage spikes. The on-delay is short, enabling fast response to control signals. The maximum load voltage of 480 V and load current of 3 x AC 5 A make the device suitable for a wide range of industrial applications.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1001481
qrcode für Dold 0059265 semiconductor contactor 3xAC5A