Dold 0059208, EAN: 4030641592080

Dold 0059208 IK8701.12/024 DC110V relay

Dold 0059208 IK8701.12/024 DC110V relay

Lieske Part No. 1152318
Mfg Part No 0059208
EAN-Code 4030641592080
Manufacturer Dold
Here only 63,02 EUR
74,99 EUR incl. VAT

Further information for Dold 0059208 IK8701.12/024 DC110V relay

Technical data
Enclosure designDistribution board
Output contacts max.2 C/O contacts
Thermal current Ith max.16 A
Width17,5 mm
TypeIK 8701
Initiator triggeringYes
Suppressor circuit on the coil inputYes
Variant
Contact equipping2 changeover contacts
Nominal voltageDC 110 V
VariantWith protection diode to protect against wrong polarity and recovery diodes to reduce switching spikes. Plus on A1+
The Dold switching relay IK8701.12/024 DC110V is an industrial relay for use in control and automation technology. It serves as an input or output coupling relay, for example, for actuating PLC systems or switching loads controlled via a PLC. The device is designed for a nominal voltage of DC 110 V and features a contact configuration with 2 changeover contacts. The width is 17.5 mm, making it suitable for use in standard installation distributors. The construction complies with the standard EN 60947-5-1, which defines requirements for switching devices for industrial controls.

Applications
This relay is specifically designed for use in industrial plants, where it serves for signal transmission between control devices and loads. It is suitable, for example, for switching lamp loads, particularly in applications with parallel compensation, such as with HQ lamps. As an input coupling relay, it can be used to actuate PLC systems, while as an output coupling relay, it controls loads operated via a PLC. This variant is designed for operation with direct voltage and provides reliable performance with inductive loads.

Functions and equipment in detail
The device features a protective circuit at the coil input, providing reverse polarity protection via protective diodes. Additionally, freewheeling diodes are integrated to suppress switching surges when disconnecting inductive loads. The connection polarity is via A1+, enabling clear assignment of the power supply. The contacts can be manually closed via a hand-operated button on the front. This button also serves as a switching position indicator: when the relay is energized, the button is pushed in; when de-energized, it flushes with the front edge. The contacts are rated for a thermal current Ith of up to 16 A, ensuring high load capacity during continuous operation.

Technology explained simply
The relay operates with a flip armature, which actuates the contacts via a plunger. When the excitation voltage drops, the armature is returned to its rest position by a spring. The mechanical actuation via the front button allows for manual switching, independent of electrical actuation. The integrated diodes protect the coil from incorrect voltages and reduce electrical interference when disconnecting inductive loads. The design as an installation distributor enables easy mounting in standard switchboards.

Compatibility and accessories
The relay is suitable for use with 2-wire initiators, with an allowable residual current ≤ 3 mA. It can also be used in combination with neon lamps, with a maximum of six neon lamps, each 0.5 mA, connected in parallel to the network button. The contact configuration is fixed at 2 changeover contacts, and the variant is designed for DC operation. Actuation is via a polarized direct voltage of DC 110 V.

Mounting and installation
The device is mounted in standard installation distributors, with a width of 17.5 mm enabling compact placement. The connection terminals are clearly labeled, with A1+ indicating the positive polarity of the coil. Mounting requires no additional tools, as the unit is designed for use in switchboards. The hand-operated button allows for easy functional testing without electrical actuation.

Advantages in operation
The relay offers high reliability when switching loads, particularly with inductive direct current loads. The integrated protective circuit prevents damage from reverse polarity and switching surges. Manual actuation and switching position indication facilitate maintenance and diagnostics. The high thermal current Ith of 16 A allows continuous loading without overheating risk. The construction in accordance with EN 60947-5-1 ensures safe and standard-compliant operation in industrial applications.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1152318
qrcode für Dold 0059208 IK8701.12/024 DC110V relay