Dold 0059038, EAN: 4030641590383

Dold 0059038 LG5944.02PC/61 AC/DC24V control panel module

Dold 0059038 LG5944.02PC/61 AC/DC24V control panel module

Lieske Part No. 1002155
Mfg Part No 0059038
EAN-Code 4030641590383
Manufacturer Dold
Here only 294,52 EUR
350,48 EUR incl. VAT

Further information for Dold 0059038 LG5944.02PC/61 AC/DC24V control panel module

Technical data
1- / 2-channel2
ApprovalsUL
Cat. / PL acc. to EN ISO 13849-14/e
ConnectionPluggable cage clamp terminals, Pluggable screw terminals, Screw terminals
Output contacts max.2 NO contacts
SIL CL acc. to IEC/EN 620613
SIL acc. to IEC/EN 620613
Thermal current Ith max.5 A
Width22,5 mm
TypeLG 5944
Variant
Contact equipping2 NO contacts
Nominal voltageAC/DC 24 V
Terminal typepluggable terminal blocks with cage clamp terminals
Approvals and MarkingsUL-listed C/US, TÜV
VariantDevice for 1 safety edge (2- and 4- wire connection possible). Termination resistor of the safety edge in 2 wire connection 0 ... 1.2 kOhm
The LG5944.02PC/61 AC/DC24V switching module from Dold is a safety-oriented monitoring component for switching modules in industrial applications. It is designed for the safe enabling and interruption of a safety circuit and can be used for protective functions for personnel and machinery. The device is designed for use with a single switching module and supports both 2- and 4-wire connection techniques. When used in 2-wire technology, the termination resistance of the switching module is 0 to 1.2 kOhm. The nominal voltage is AC/DC 24 V, and the module is equipped with removable spring-loaded terminals, enabling flexible and quick installation.

Applications
This module is intended for safety-critical applications in automation technology, particularly in the manufacturing industry, for machines with switching modules, or in systems requiring redundant safety monitoring. It monitors the status of the switching module and responds to wire breaks or functional failures to ensure the safety of the system. The application typically involves use with a single-button switch, where activation can occur either via the button or through an automatic enable function (switch S2).

Functions and Features in Detail
The device features two redundant safety outputs, each configured as a normally closed contact. These outputs enable the safe control of switching modules and support compliance with safety requirements. Wire break detection at the single-button switch ensures that any interrupted or damaged wiring condition is detected. An operational status indicator with LED displays for channel 1 and channel 2 informs the operator of the current status of both channels. The switching current limitation to a maximum of 10 mA protects the connected switching module from electrical damage, even in the event of a short circuit.

Technology Explained Simply
The switching current limitation is a key feature that increases the lifespan of the switching module and minimizes the risk of overloads. The maximum current rating (thermal current Ith) is 5 A, defining the device’s load capacity under normal operating conditions. The module width of 22.5 mm allows for compact installation in standard control panels. The connection technology includes removable spring-loaded terminals, enabling quick replacement of the module without requiring changes to the entire wiring. Removable screw terminals are also available as an option.

Compatibility and Accessories
The module is designed for use with switching modules operating in 2- or 4-wire technology. It is equipped with the necessary certifications, including UL-listed C/US and TÜV, enabling use in various markets. The safety functions comply with standards EN ISO 13849-1 (Category 4, Performance Level e) and IEC/EN 62061 (SIL 3). The maximum SIL (SIL requirement limit) is also 3, confirming suitability for safety-critical applications.

Mounting and Installation
Mounting is performed in standard control panels with a module width of 22.5 mm. The removable spring-loaded terminals allow for easy and secure connection of wires. The terminal connectors are designed to ensure a secure connection even under vibration and mechanical stress. Installation should follow the instructions in the datasheet, with correct wiring of the switching module and adherence to termination resistances in 2-wire technology being critical.

Operational Advantages
The universal applicability for switching modules with various permissible switching currents, including low currents, increases the module’s flexibility. The quick replaceability via removable terminal blocks reduces downtime during maintenance. The integrated operational status indicator with LED indicators for both channels enables rapid error diagnosis. The switching current limitation provides permanent protection for the switching module against overloads, increasing the reliability and lifespan of the entire system. UL and TÜV certifications ensure compliance with international safety standards.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1002155
qrcode für Dold 0059038 LG5944.02PC/61 AC/DC24V control panel module