| Technical data |
| Diameter | 105 mm, 140 mm, 210 mm |
| For relay type | RN 5883 |
| Type | ND 5018 |
| Variant |
| Variant | 105 mm inner diameter |
The Dold ND5018/105 is a
residual current transformer of the ND 5018 series, specifically designed for use in industrial control systems and safety systems. It is used for measuring and monitoring residual currents, particularly in the context of earth fault protection circuits, to detect electrical disturbances or leakage currents at an early stage. The ND5018/105 variant features an
inner diameter of 105 mm, making it suitable for mounting around cables or cable bundles with a corresponding cross-section. The transformer is part of the ND 5018 product family and is available in various diameter variants, including 105 mm, 140 mm, and 210 mm, to meet different requirements for cable passage.
Applications
The residual current transformer ND5018/105 is used in industrial installations where precise and reliable detection of residual currents is required. It is particularly intended for use in protection systems based on the detection of fault currents, such as those occurring during insulation faults or short circuits. It is commonly used in conjunction with relays of type RN 5883, for which the transformer is specifically designed. Application areas include, among others, machine construction, manufacturing systems, power supply systems, and safety systems where high operational safety is required.
Functions and Equipment in Detail
The transformer operates on the principle of inductive current measurement. It detects the magnetic flux generated by the current flowing in the cable and converts it into a proportional electrical signal. The
variant with 105 mm inner diameter allows mounting around cables or conductors with an outer diameter up to 105 mm. The design ensures stable and reproducible measurement, regardless of minor variations in the positioning of the cable within the transformer core.
Technology Explained Simply
A residual current transformer measures the difference between incoming and outgoing current in a conductor. During normal operation, the same current flows in and out of the system, resulting in a difference of zero. However, if a fault occurs, such as a leakage current due to damaged insulation, part of the current flows away via an alternative path, creating a difference. The transformer detects this difference and sends a corresponding signal to the connected relay (e.g., RN 5883), which can then trigger a disconnection or alarm. The
measurement is inductive, without direct electrical contact to the conductor, which increases safety and ensures interference-free operation.
Compatibility and Accessories
The Dold ND5018/105 is specifically designed for use with the relay device type
RN 5883. Compatibility is confirmed by the manufacturer, ensuring safe and reliable signal transmission between the transformer and the relay. The ND 5018 series includes various diameters, allowing the appropriate variant to be selected based on cable cross-section.
Mounting and Installation
Installation is performed by clamping the conductor or cable bundle around the core of the residual current transformer. The
inner diameters of 105 mm, 140 mm, and 210 mm allow adaptation to different cable sizes. Installation does not require additional tools or special mounting aids, as the transformer is mechanically designed to wrap around the cable and be securely fixed.
Advantages in Operation
The use of the Dold ND5018/105 provides reliable and precise detection of residual currents, increasing safety in electrical installations. The
inductive measurement prevents direct electrical connections, minimizing the risk of short circuits or interference. Compatibility with the RN 5883 relay enables integrated earth fault detection, which is required in many industrial safety systems. The robust construction and availability in various diameters increase flexibility in planning and installing protection systems.