Dold 0058987, EAN: 4030641589875

Dold 0058987 GB9034/0101 motor brake unit 60A

Dold 0058987 GB9034/0101 motor brake unit 60A

Lieske Part No. 1001884
Mfg Part No 0058987
EAN-Code 4030641589875
Manufacturer Dold
Here only 1.474,70 EUR
1.754,89 EUR incl. VAT

Further information for Dold 0058987 GB9034/0101 motor brake unit 60A

Technical data
Braking current adjustable up to max.600 A
Braking time adjustable up to max.320 s
Width110 mm
TypeGB 9034
Automatic standstill monitoringYes
External brake contactor requiredYes
Signalling outputYes
Temperature monitoringYes
Variant
Auxiliary voltageWithout
Braking current60 A
Nominal voltageAC 400 V
Approvals and MarkingsUKCA
VariantBrake current monitoring, thermistor-motor protection input, star-delta control and output relay for standstill indication. Removable terminals
The electronic motor brake device GB 9034 of the MINISTOP series by Dold is designed for wear-free braking of three-phase and alternating current asynchronous motors. It is used in drives that must be reliably braked for safety and functional reasons. The device enables precise control of the braking process and is suitable for use in industrial plants such as sawmills, centrifuges, woodworking machines, textile machines, and conveyor systems. The braking function is implemented via DC braking with single-phase rectification, with the braking current adjustable up to 600 A. The rated voltage is AC 400 V, and the device complies with the standard IEC/EN 60947-4-2. The width is 110 mm, enabling compact mounting in enclosures.

Applications

The motor brake device is designed for drives requiring fast and secure braking. Typical applications include machines in woodworking, the textile industry, conveyor technology, and plants requiring precise positioning or safe shutdown. The integrated standstill monitoring ensures that the motor stops within the set braking time. If standstill is not achieved, a fault is reported via a potential-free alarm contact, increasing process safety.

Functions and Equipment in Detail

The device features automatic standstill monitoring, which monitors the motor status and ends the braking process accordingly. The braking time is adjustable up to 320 seconds, allowing adaptation to various drive conditions. An external brake contactor is required, controlled via terminals 1/2. The control terminals are plug-in, simplifying installation and maintenance. Temperature monitoring is performed via an optional thermistor input, monitoring the motor or cooling body status. The variant also includes a thermistor motor protection input, star/delta control, and a standstill alarm relay.

Technology Explained Simply

The braking function is based on DC braking, where the stator winding of the motor is supplied with DC voltage via a single-phase rectifier. This results in rapid braking without mechanical wear. The safety time between switching off the motor contactor and switching on the brake contactor prevents induced voltages from damaging the power section. The ready LED indicates that the supply voltage is present. Control is via terminals L1-L2, with the interlock contact closing for the motor contactor. The braking DC voltage is tapped at terminals U and V.

Compatibility and Accessories

The device is suitable for all asynchronous motors and can be integrated into existing installations. The variant offers star/delta control, suitable for starting motors with high inrush current loads. A thermistor motor protection input enables integration with temperature monitoring systems. The plug-in control terminals simplify installation and maintenance. UKCA approval is available, enabling use in the EU and the United Kingdom.

Mounting and Installation

Mounting is in an enclosure, with the width of 110 mm allowing compact placement. The connection terminals are clearly labeled: L1-L2 for supply voltage, U-V for braking DC voltage, 1-2 for the external brake contactor, and 8-9 for interlocking the motor contactor. Terminals 6-7 serve as starter contact (normally open contact of the motor contactor). Installation requires the use of an external brake contactor, controlled via terminals 1/2. The safety time between switching off the motor contactor and switching on the brake contactor is already incorporated in the device to avoid induced voltages.

Advantages in Operation

The motor brake device offers higher safety through shorter coast-down times and more economical operation through wear-free operation. Simple installation, even in existing plants, reduces mounting time. The maintenance-free design reduces maintenance costs. The adjustable braking time and adjustable braking current allow individual adaptation to specific drive conditions. The integrated standstill monitoring and alarm output increase process safety by detecting and reporting malfunctions early.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1001884
qrcode für Dold 0058987 GB9034/0101 motor brake unit 60A