Further information for Dold 0058776 IK8701.12/008 DC220/230V relay
Technical data
Enclosure design
Distribution board
Output contacts max.
2 C/O contacts
Thermal current Ith max.
16 A
Width
17,5 mm
Type
IK 8701
Initiator triggering
Suppressor circuit on the coil input
Variant
Contact equipping
2 changeover contacts
Nominal voltage
DC 220 / 230 V
Variant
With protection diode to protect against wrong polarity and recovery diodes to reduce switching spikes. Plus on A2+
The Dold switching relay IK8701.12/008 DC220/230V is an industrial contact relay for use in control and automation technology. It serves as an input or output coupling relay, for example, for actuating PLC systems or for controlling loads that are operated via a PLC. The device is specifically designed for operation with direct voltage at the nominal voltage DC 220/230 V and features a contact configuration with two changeover contacts. The width is 17.5 mm, making it suitable for installation in standard distribution boxes. The housing design is implemented as an installation distributor, enabling easy mounting in enclosures.
Applications
This relay is designed for use in industrial plants, particularly for switching lamp loads. It is also suitable as an input coupling relay to forward signals from sensors or other devices to a PLC, or as an output coupling relay to switch PLC-controlled loads. The construction with freewheeling diodes and protection diodes makes it especially suitable for operation with inductive loads, as switching surges are suppressed and reverse polarity protection is ensured. The connection polarity is via A2+.
Functions and equipment in detail
The device features a manual operation button on the front, which also serves as a switching position indicator. When energized, the button is pushed in, indicating the closed contact position. In the de-energized state, the black button is flush with the front edge of the housing. The contacts are actuated via a toggle armature with a plunger; after the excitation voltage drops, the armature is returned to its resting position by a spring. The maximum thermal current rating (Ith) is 16 A, enabling high load capacity during continuous operation.
Technology explained simply
The protection circuitry at the coil input includes protection diodes, which protect against reverse polarity, and freewheeling diodes, which reduce voltage spikes generated when switching off inductive loads. These measures increase the reliability and service life of the relay. This variant is specifically designed for direct voltage, with the connection polarity A2+ used. The contact configuration with two changeover contacts enables flexible switching options in control circuits. Compliance with the standard EN 60947-5-1 ensures electrical safety and reliability of the device.
Compatibility and accessories
The relay is suitable for actuation with 2-wire initiators, with the permissible residual current being ≤ 3 mA. It can also be operated with up to six neon lamps (each 0.5 mA) connected in parallel to the network button. The contact configuration is fixed at two changeover contacts, with the option to choose different variants (e.g., for lamps with parallel compensation or large inductive loads) available in the product range. The width of 17.5 mm allows for compact mounting in standard distribution boxes.
Mounting and installation
The relay is mounted in installation distributor boxes, with the width of 17.5 mm allowing for compact placement. The connection terminals are clearly labeled, with control signals connected via A1/A2 (AC) or A1+/A2 (DC polarized). The output contacts are configured as changeover contacts (11,12,14; 21,22,24). The manual operation button enables manual testing of the switching function without electrical supply.
Advantages in operation
The combination of high thermal current Ith of 16 A, protection diodes, and freewheeling diodes ensures robust and reliable operation even under difficult load conditions. The switching position indication via the manual operation button facilitates diagnosis and maintenance. Compliance with the standard EN 60947-5-1 ensures safety and compatibility in industrial applications. The device is designed for use in control and automation systems where stable and precise switching function is required.