| Technical data |
| Load current up to | 125 A |
| Load voltage up to | AC 600 V |
| Number of poles | 1-pole |
| On/Off Input Control | AC/DC, DC |
| Width | 45 mm |
| Type | PH 9260 |
| Variant |
| Control voltage | DC 4 - 32 V |
| Load current | AC 50 A |
| Load voltage | AC 48 - 600 V |
| Semiconductor output | 1-pole |
| Variant | Switching at zero crossing. With heigh I2t-value. Without heat sink. |
The Dold semiconductor relay PH9260.91/100 AC48-600V AC50A is an
AC semiconductor relay for use in industrial applications. It is designed for wear-free and noiseless switching of loads in the fields of heating technology, motor control, valve control, and lighting. The device is designed in accordance with
IEC/EN 60947-4-3 and is suitable for applications in the plastics and rubber industry, packaging machines, soldering systems, and food processing. This variant is
zero-voltage switching, meaning that the load circuit is activated at the next zero crossing of the sinusoidal mains voltage to minimize voltage spikes and disturbances. Control is via a
DC control voltage of 4 to 32 V, and the relay is also suitable for AC/DC actuation. The load voltage range is
AC 48 to 600 V, and the load current is
AC 50 A. The maximum load current capacity of the device is
125 A under AC-51 operation, with a limiting load integral value (I²t) of up to
18000 A²s. This makes the relay particularly suitable for applications with high inrush currents, such as heating elements or motors. The width is
45 mm, enabling compact mounting on a DIN rail.
Applications
This semiconductor relay is used in industrial control and regulation circuits where reliable, maintenance-free switching is required. Typical applications include controlling heating systems in injection molding machines, driving electric motors in production lines, or switching lighting systems in factories. Due to its zero-voltage switching function, it is especially suitable for installations where avoiding voltage spikes and electromagnetic interference is important. The high I²t value protects the device against short-term overloads and increases its service life.
Functions and Equipment in Detail
The device features two
anti-parallel connected thyristors responsible for the switching function. The
DCB technology (Direct-Copper-Bonding) ensures excellent heat transfer, reducing thermal stress and increasing reliability. The
LED status indicator signals the state of the control input, allowing visual monitoring of operation. The
box terminals enable secure and easy connection of wires. The
surge voltage rating is 1200 V or 1600 V, and the
insulation voltage is 4000 V, ensuring high electrical safety. The
shock protection class IP20 protects against contact with moving parts, while the enclosure protection rating IP40 ensures mechanical and electrical safety during operation.
Technology Explained Simply
The zero-voltage switching function means that the relay does not close the load circuit immediately upon application of the control voltage, but only at the next zero crossing of the AC voltage. This prevents spark generation and voltage spikes that could cause network disturbances. DCB technology improves heat dissipation by creating a direct copper bond between the semiconductor and the heatsink, reducing the semiconductor temperature and increasing service life and reliability. The I²t value specification describes the relay’s ability to withstand short, high current surges without damage — a critical factor when switching inductive loads such as motors.
Compatibility and Accessories
The relay is designed for use in industrial control systems and can be connected to various control devices providing a DC control voltage of 4 to 32 V. Optionally, the device is available with a
heatsink, which can be snapped onto the DIN rail to improve heat dissipation. Additionally, an
over-temperature protection is available, where a temperature limit switch (normally open) can be inserted into a designated pocket on the underside of the device. This switch disconnects the load circuit when the heatsink temperature exceeds a predefined value (e.g., 100 °C). An example of a suitable temperature limit switch is the type
UP62 – 100 from UCHIYA.
Mounting and Installation
The relay is mounted on a DIN rail, with a width of 45 mm enabling compact placement. The box terminals allow for easy and secure wire connections. Installation must take place in a closed enclosure, as the enclosure protection rating IP40 does not protect against direct weather exposure. The operating temperature range is from -20 °C to 40 °C, while the storage temperature can reach up to 80 °C. Vibration resistance is ensured in accordance with IEC/EN 60068-2-6, with an amplitude of 0.35 mm and a frequency range of 10 to 55 Hz.
Advantages in Operation
The semiconductor relay offers wear-free operation, as there are no mechanical contacts. This results in a long service life and reduced maintenance costs. The zero-voltage switching function minimizes network disturbances and protects sensitive loads. The high I²t value enables use with loads having high inrush currents. The LED indicator simplifies diagnosis and monitoring of the operating status. DCB technology ensures efficient cooling, increasing reliability during continuous operation. The device is designed for industrial use and meets safety and reliability requirements in demanding environments.