Further information for Dold 0058436 GB9034/0111 100A AC50/60Hz 400V motor brake relay
Technical data
Braking current adjustable up to max.
600 A
Braking time adjustable up to max.
320 s
Width
110 mm
Type
GB 9034
Automatic standstill monitoring
External brake contactor required
Signalling output
Temperature monitoring
Variant
Auxiliary voltage
Without
Braking current
100 A
Nominal voltage
AC 400 V
Approvals and Markings
UKCA
Variant
Brake current monitoring, thermistor-motor protection input, star-delta control and output relay for standstill indication. Brake current indicator. Removable terminals
The electronic motor brake device GB 9034 from Dold's MINISTOP series is designed for wear-free braking of three-phase and alternating current induction motors. It is intended for drives that must be reliably braked for safety and functional reasons, for example in sawmills, centrifuges, woodworking machines, textile machines or conveyor systems. The device enables precise control of the braking process and ensures safe disconnection of the braking current via integrated standstill monitoring as soon as the motor has stopped.
Applications
This brake device is designed for industrial applications where rapid and reliable braking is required. It is particularly used in systems where a long coast-down time of the motor would be dangerous or impair functionality. Application areas include, among others, woodworking machines, textile industry, conveyor systems, and machines with high rotational speeds where controlled stopping is necessary.
Functions and equipment in detail
The device features braking current monitoring, ensuring that the set braking current actually flows. Any deviation from this value is signaled via a potential-free alarm contact. Temperature monitoring allows monitoring of motor or cooling body temperature via an optional thermistor input. Automatic standstill monitoring detects whether the motor has come to a stop within the set maximum braking time (up to 320 seconds). If this is not the case, a fault is reported via an alarm output. The braking current display shows the current value, with the display using LEDs that light up alternately to indicate the actual value.
Technology explained simply
The device operates using DC braking via a single-phase rectifier, directing the braking current into the stator winding of the motor. The braking current strength is adjustable and can reach up to 600 A; for this item, the rated value is 100 A. The braking time is also adjustable and can last up to 320 seconds. The supply voltage is connected to terminals L1 and L2, with the rated voltage being AC 400 V. The external brake contactor is controlled via terminals 1–2, with a safety time maintained to avoid induction voltages that could damage the power section. The control terminals are designed as plug-in terminals, simplifying installation and maintenance.
Compatibility and accessories
The device is suitable for all induction motors and can be integrated into existing systems. It is equipped with star-delta control, allowing it to be used with drives having corresponding start logic. The variant includes a thermistor motor protection input, which can be optionally used. The standstill alarm relay function is also integrated to monitor the motor's standstill. The width is 110 mm, enabling compact installation in enclosures. The device complies with the standard IEC/EN 60947-4-2 and carries the UKCA mark.
Mounting and installation
Mounting is done in an enclosure, connecting terminals L1–L2 to the supply voltage. Motor connections are made to U, V, W. The external brake contactor is controlled via terminals 1–2. The interlock contacts (8–9) ensure that the motor contactor is switched off before braking current flows. Plug-in terminals simplify installation and maintenance. Terminal designations are detailed in the datasheet.
Advantages in operation
The device offers higher safety through shorter coast-down times and reduces wear on mechanical brakes. It is maintenance-free and enables precise control of the braking process. The integrated standstill monitoring and alarm functions increase operational safety. Adjustable parameters (braking current, braking time) allow adaptation to different drive requirements. The width of 110 mm and plug-in terminals facilitate integration into existing control systems.