Dold 0058299, EAN: 4030641582999

Dold 0058299 GB9034 40A AC50/60Hz 400V motor brake unit

Dold 0058299 GB9034 40A AC50/60Hz 400V motor brake unit

Lieske Part No. 1001870
Mfg Part No 0058299
EAN-Code 4030641582999
Manufacturer Dold
Here only 1.176,80 EUR
1.400,39 EUR incl. VAT

Further information for Dold 0058299 GB9034 40A AC50/60Hz 400V motor brake unit

Technical data
Braking current adjustable up to max.600 A
Braking time adjustable up to max.320 s
Width110 mm
TypeGB 9034
Automatic standstill monitoringYes
External brake contactor requiredYes
Signalling outputYes
Temperature monitoringYes
Variant
Auxiliary voltageWithout
Braking current40 A
Nominal voltageAC 400 V
Approvals and MarkingsUKCA
The electronic motor brake device GB 9034 of the MINISTOP series by Dold is designed for wear-free braking of three-phase and alternating current asynchronous motors. It is intended for drives that must be reliably and quickly braked for safety and functional reasons, for example in sawmills, centrifuges, woodworking machines, textile machines or conveyor systems. The device operates on the principle of direct current braking with single-phase rectification and enables precise control of the braking process via adjustable parameters.

Applications
This motor brake device is designed for industrial applications where short coast-down times and high operational safety are required. It is particularly suitable for drives in woodworking, the textile industry, conveyor technology, and machines operating at high speeds. The integrated standstill monitoring ensures that the motor actually comes to a stop within the set braking time, which is crucial for operational safety.

Functions and Equipment in Detail
The device features automatic standstill monitoring, which ends the braking process once standstill is reached. Alternatively, the braking current can be switched off after a set braking time. In standstill-dependent braking, a potential-free alarm contact signals if the motor has not come to a stop within the maximum braking time. The braking time is adjustable up to a maximum of 320 seconds, and the braking current up to a maximum of 600 A. For the variant presented, the braking current is 40 A. Temperature monitoring protects the device and the motor from overheating.

Technology Explained Simply
Direct current braking is achieved via single-phase rectification, allowing current to flow into the stator winding of the motor and thereby controlling its speed reduction. The supply voltage is connected at terminals L1–L2, and the braking DC voltage is taken from terminals U and V. The external brake contactor is controlled via contact 1–2. A safety time ensures that the motor contactor has fully dropped out before the braking current flows, preventing induction voltages that could damage the power section.

Compatibility and Accessories
The width of the device is 110 mm. The rated voltage is AC 400 V, and no auxiliary voltage is provided. UKCA certification is available. The device can be integrated into existing installations, with connection terminals for supply, motor, brake contactor, and signal outputs clearly marked.

Mounting and Installation
Mounting is carried out in an enclosure or control system. Terminals L1–L2 are used for connecting the supply voltage, while terminals U–V provide the braking DC voltage. The external brake contactor is controlled via contact 1–2. Interlock contacts 8–9 ensure the correct sequence of switching operations. The connection terminals are clearly labeled to ensure error-free installation.

Advantages in Operation
Wear-free braking reduces maintenance requirements and extends the service life of the system. Shorter coast-down times increase safety and economic efficiency. Adjustable parameters allow adaptation to different motor sizes and requirements. The integrated standstill monitoring and alarm output provide additional safety functions that are important for critical applications.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1001870
qrcode für Dold 0058299 GB9034 40A AC50/60Hz 400V motor brake unit