Dold 0058290, EAN: 4030641582906

Dold 0058290 GB9034 400A AC50/60Hz 400V motor brake unit

Dold 0058290 GB9034 400A AC50/60Hz 400V motor brake unit

Lieske Part No. 1001879
Mfg Part No 0058290
EAN-Code 4030641582906
Manufacturer Dold
Here only 4.376,27 EUR
5.207,76 EUR incl. VAT

Further information for Dold 0058290 GB9034 400A AC50/60Hz 400V motor brake unit

Technical data
Braking current adjustable up to max.600 A
Braking time adjustable up to max.320 s
Width110 mm
TypeGB 9034
Automatic standstill monitoringYes
External brake contactor requiredYes
Signalling outputYes
Temperature monitoringYes
Variant
Auxiliary voltageWithout
Braking current400 A
Nominal voltageAC 400 V
Approvals and MarkingsUKCA
The electronic motor brake device GB 9034 of the MINISTOP series by Dold is designed for wear-free braking of three-phase and alternating current asynchronous motors. It is used in drives that must be reliably braked for safety and functional reasons, for example in sawmills, centrifuges, woodworking machines, textile machines or conveyor systems. The device enables precise and reliable braking via DC braking with single-phase rectification and is compliant with IEC/EN 60947-4-2. The width is 110 mm, allowing compact installation in enclosures.

Applications

The motor brake device is designed for applications requiring rapid and secure stopping of the motor. It is particularly suitable for machines operated in industrial production environments where short coast-down times and high operational safety are required. The integrated standstill detection ensures that the braking process is automatically terminated as soon as the motor stops, guaranteeing energy savings and preventing overheating.

Functions and equipment in detail

The device features automatic standstill monitoring, which monitors the motor status and switches off the braking current once standstill is reached. The braking time is adjustable up to a maximum of 320 seconds, allowing the braking duration to be adapted to the specific requirements of the drive. The braking current is 400 A and adjustable up to a maximum of 600 A, enabling flexible adaptation to different motor powers. An alarm output is integrated, which signals if the motor has not come to a standstill within the maximum braking time during standstill-dependent braking. In addition, temperature monitoring is provided, which detects overheating of the motor or heat sink.

Technology explained simply

Braking is achieved via DC braking, where a direct current flows through the stator winding of the motor to stop its rotation. The supply voltage is connected at terminals L1–L2, with the ready LED indicating that voltage is present. The braking current is drawn from terminals U and V. The external brake contactor is controlled via contact 1–2, with a safety time maintained to ensure that the motor contactor has dropped out before the braking current flows. This prevents damage to the power electronics from induced voltages. The functions are coordinated to ensure that the braking process runs safely and reliably.

Compatibility and accessories

The device is suitable for all asynchronous motors and can be integrated into existing installations. An external brake contactor is required, as the device does not include an integrated brake contactor for this power class. No auxiliary voltage is provided, meaning no additional voltage supply is needed for auxiliary functions. The approvals include the UKCA mark, confirming compliance with applicable European safety requirements.

Mounting and installation

Mounting is carried out in an enclosure, taking into account the width of 110 mm. The connection terminals are clearly labeled: L1–L2 for supply voltage, U–V for braking current, 1–2 for the external brake contactor, and 8–9 for the motor contactor interlock. Terminals 33–34 are for fault signaling, and 13–14 are designated for standstill signaling. Installation requires correct wiring of external components, especially the brake contactor, to ensure functional safety.

Advantages in operation

The motor brake device offers higher safety through shorter coast-down times and reduced mechanical stress on the system. It is wear-free and maintenance-free, reducing operating costs. The simple integration into existing installations and adjustable parameters for braking current and time allow customized adaptation to the specific application. The automatic standstill monitoring and alarm output increase system reliability and support fault diagnosis during operation.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1001879
qrcode für Dold 0058290 GB9034 400A AC50/60Hz 400V motor brake unit