Dold 0057883, EAN: 4030641578831

Dold 0057883 semiconductor contactor AC110-240V AC10A

Dold 0057883 semiconductor contactor AC110-240V AC10A

Lieske Part No. 1001495
Mfg Part No 0057883
EAN-Code 4030641578831
Manufacturer Dold
Here only 191,91 EUR
228,37 EUR incl. VAT

Further information for Dold 0057883 semiconductor contactor AC110-240V AC10A

Technical data
Analog Input Control4 - 20 mA
ApprovalsUL
Load current up to50 A
Load voltage up toAC 480 V
Number of poles1-pole
Width22,5 mm, 45 mm, 90 mm
TypeBF 9250/0_2
Temperature monitoringYes
Variant
Auxiliary voltageAC/DC 24 V
Contact equippingwithout signal contact
Control inputDC 0 - 10 V
Load currentAC 10 A
Load voltageAC 110 - 240 V
Semiconductor output1-pole
Approvals and MarkingsUL-listed C/US
VariantOutput control with fixed period of 64 cycles
The Dold semiconductor contactor BF9250.91/002 UH=AC/DC24V DC0-10V is a 1-pole industrial relay for pulse packet control of heating elements. It is used for precise temperature control in industrial applications where analog control is required. The device operates with an auxiliary voltage of AC/DC 24 V and features a control input for DC 0–10 V, with the option of control via DC 4–20 mA or a potentiometer input in the range of 0–10 kΩ. Control is achieved through a linear distribution of pulses over 64 cycles, enabling fine, stepless regulation of load power. The load voltage is in the range AC 110–240 V, and the load current is AC 10 A. The maximum rated voltage is AC 480 V, and the maximum rated current is AC 50 A, with the width varying according to rated current: 22.5 mm for 10 A, 45 mm for 25 A, and 90 mm for 50 A. The device is zero-voltage switching, ensuring noiseless and interference-free switching operation. The varistor protection circuit protects against overvoltage, and a temperature protection for the power semiconductor prevents overheating. The operating temperature is between 0 °C and 40 °C, with a maximum ambient temperature of 60 °C, considering current derating. The LED indicator signals the operating status: green LED for power supply, yellow LED for output status, and red LED for alarms. In case of synchronization errors, control input errors, or semiconductor overheating, the LEDs light up accordingly — in case of overheating, the red LED remains on until the power supply is briefly switched off and on again. The device is snap-on to DIN rail and complies with standards IEC/EN 60947-4-2 and IEC/EN 60947-4-3. The UL-listed C/US certification is provided. The load is resistive, and operation is continuous. The resolution of the output control is 1.5625 %, enabling fine regulation. The residual current in the off state is 1.0 mA at rated voltage and frequency. The blocking voltage is ±1200 V. Installation requires a minimum clearance of 20 mm above/below the cable duct and 10 mm left/right. The operating voltage for the auxiliary voltage is AC/DC 24 V, and the supply current is under 26 mA at DC 24 V. The maximum air humidity is 75 % without condensation. The power range is 0–100 %, and the frequency is between 45 and 65 Hz. The varistor voltage is AC 510 V. Power losses are approximately 1.2 V × I_L (A). The I²t values for fuse protection are 800 A²s for 10 A and 25 A, and 1800 A²s for 50 A, with a switching time of 1 to 10 ms. The minimum load is AC 40 mA. In case of semiconductor overheating, the current is reduced: 0.2 A/°C for 10 A, 0.4 A/°C for 25 A, and 0.6 A/°C for 50 A starting at 40 °C. The device is suitable for use in industrial heating systems, such as drying plants, ovens, or temperature control devices. Control is via an analog input, enabling precise and interference-free temperature regulation. Zero-voltage detection ensures noiseless and interference-free switching. The LED indicators allow for quick diagnosis of operating conditions and faults. The width of 22.5 mm makes the device suitable for compact control panels. The UL-listed C/US certification ensures use in the USA and Canada. The devices are designed for use in industrial environments where reliable and precise load control is required. Pulse packet control enables efficient and damage-free operation of heating elements. The use of semiconductors instead of mechanical contacts extends service life and reduces maintenance. Control via DC 0–10 V or DC 4–20 mA enables easy integration into existing control systems. Temperature monitoring and LED alerts increase operational safety. DIN rail mounting facilitates installation in enclosures. The maximum load voltage of AC 480 V and maximum load current of AC 50 A make the device suitable for a wide range of industrial applications. Current reduction at elevated temperatures protects the device from thermal overload. The I²t values allow selection of appropriate protective devices. The varistor protection circuit protects against transient overvoltages. Zero-voltage detection ensures interference-free switching. The LED indicators provide visual feedback on operating status. The width of 22.5 mm is suitable for use in compact control panels. The UL-listed C/US certification ensures use in the USA and Canada. The devices are suitable for use in industrial heating systems, such as drying plants, ovens, or temperature control devices. Control is via an analog input, enabling precise and interference-free temperature regulation. Zero-voltage detection ensures noiseless and interference-free switching. The LED indicators allow for quick diagnosis of operating conditions and faults. The width of 22.5 mm makes the device suitable for compact control panels. The UL-listed C/US certification ensures use in the USA and Canada. The devices are designed for use in industrial environments where reliable and precise load control is required. Pulse packet control enables efficient and damage-free operation of heating elements. The use of semiconductors instead of mechanical contacts extends service life and reduces maintenance. Control via DC 0–10 V or DC 4–20 mA enables easy integration into existing control systems. Temperature monitoring and LED alerts increase operational safety. DIN rail mounting facilitates installation in enclosures. The maximum load voltage of AC 480 V and maximum load current of AC 50 A make the device suitable for a wide range of industrial applications. Current reduction at elevated temperatures protects the device from thermal overload. The I²t values allow selection of appropriate protective devices. The varistor protection circuit protects against transient overvoltages. Zero-voltage detection ensures interference-free switching. The LED indicators provide visual feedback on operating status. The width of 22.5 mm is suitable for use in compact control panels. The UL-listed C/US certification ensures use in the USA and Canada.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1001495
qrcode für Dold 0057883 semiconductor contactor AC110-240V AC10A