Further information for Dold 0057882 semiconductor contactor AC110-240V AC10A
Technical data
Analog Input Control
4 - 20 mA
Approvals
UL
Load current up to
50 A
Load voltage up to
AC 480 V
Number of poles
1-pole
Width
22,5 mm, 45 mm, 90 mm
Type
BF 9250/0_2
Temperature monitoring
Variant
Auxiliary voltage
AC/DC 24 V
Contact equipping
without signal contact
Control input
DC 4 - 20 mA
Load current
AC 10 A
Load voltage
AC 110 - 240 V
Semiconductor output
1-pole
Approvals and Markings
UL-listed C/US
Variant
Output control with fixed period of 64 cycles
The Dold semiconductor contactor BF9250.91/002 UH=AC/DC24V DC4-20mA is an industrial semiconductor contactor with an analog control input for precise temperature control in heating systems. It serves as pulse packet control for resistive loads such as heating elements and enables fast, noiseless switching without mechanical contacts. The device is designed for use in industrial and technical installations where precise load control is required, for example in process control or building automation.
Applications
This contactor is specifically designed for controlling heating systems, where continuous and precise regulation of power output is required. It is suitable for applications with load voltages in the range AC 110–240 V and a load current of AC 10 A. The pulse packet control ensures that the load is operated in short, regulated pulses, achieving an even temperature distribution. The zero-voltage switching function minimizes electrical interference and extends the service life of the load. The linear distribution of pulses over 64 cycles ensures high control resolution with a step size of 1.5625 %, enabling fine adjustment of power output.
Functions and Equipment in Detail
The control input operates with an analog signal in the range DC 4–20 mA, provided by an external controller or process control system. The input circuit is equipped with overcurrent protection and reverse polarity protection to prevent damage to the device. The auxiliary voltage is AC/DC 24 V, enabling flexible integration into existing control systems. The LED indicators signal the operating status: green LED for power supply, yellow LED for output status, and red LED for fault messages. In case of a synchronization error, a fault in the control input, or overtemperature of the power semiconductors, the red LED lights up, with the overtemperature message being stored and requiring a brief power-off to reset.
Technology Explained Simply
The device operates as a semiconductor contactor, meaning it switches the load electronically via thyristors or triacs, without mechanical contacts. The pulse packet control works by switching the load on in short, regulated time intervals, where the duration of the on-pulses is proportional to the input signal. The zero-voltage switching function ensures that the switch only operates at the moment of voltage zero crossing, minimizing network interference. The varistor protection circuit protects the device against transient overvoltages. The temperature protection function monitors the temperature of the power semiconductors and switches off the output if a critical temperature is reached, preventing damage.
Compatibility and Accessories
The contactor is designed for load voltages up to AC 480 V and load currents up to AC 50 A, with the specified variant configured for AC 110–240 V and AC 10 A. It is mountable on DIN rail and has a width of 22.5 mm, enabling compact installation in enclosures. Control is via an analog input, which can optionally also be operated as DC 0–10 V or as a potentiometer (0–10 kΩ). The certifications according to IEC/EN 60947-4-2 and IEC/EN 60947-4-3 as well as the UL listing C/US confirm compliance with international safety and quality standards.
Mounting and Installation
The device is mounted on a DIN rail, with recommended spacing to adjacent devices of at least 10 mm laterally and 20 mm above/below to ensure sufficient cooling. Connections are made via terminals: A1 (+) and A2 (-) for auxiliary voltage, X1 for control input, L1/N for mains connection terminals, and T1/N for load outputs. The operating temperature range is between 0 °C and 40 °C, with current derating at higher temperatures (e.g. 0.2 A/°C at 10 A rated current above 40 °C). The maximum ambient humidity is 75 % without condensation.
Operational Advantages
The semiconductor contactor offers a noiseless and wear-free switching function, increasing service life and reducing maintenance effort. The precise analog control enables exact temperature regulation, which is important in sensitive processes. The integrated diagnostic function with LED indicators and stored overtemperature message supports fault diagnosis. The zero-voltage switching and varistor protection increase reliability in operation. The DIN rail mounting and compact design facilitate integration into existing enclosures.