Dold 0057671, EAN: 4030641576714

Dold 0057671 GB9034/1101 40A AC50/60Hz 200-690V motor brake device UH AC230V

Dold 0057671 GB9034/1101 40A AC50/60Hz 200-690V motor brake device UH AC230V

Lieske Part No. 1001898
Mfg Part No 0057671
EAN-Code 4030641576714
Manufacturer Dold
Here only 1.552,18 EUR
1.847,09 EUR incl. VAT

Further information for Dold 0057671 GB9034/1101 40A AC50/60Hz 200-690V motor brake device UH AC230V

Technical data
Braking current adjustable up to max.600 A
Braking time adjustable up to max.320 s
Width110 mm
TypeGB 9034
Automatic standstill monitoringYes
External brake contactor requiredYes
Signalling outputYes
Temperature monitoringYes
Variant
Auxiliary voltageAC 230 V
Braking current40 A
Nominal voltageAC 200 - 690 V
Approvals and MarkingsUKCA
VariantWide voltage input (UN = 200 ... 690 V). Brake current monitoring, thermistor-motor protection input, star-delta control and output relay for standstill indication. Removable terminals
The electronic motor brake device GB 9034/1101 from Dold is a device of the MINISTOP series, designed for wear-free braking of three-phase and alternating current asynchronous motors. It is particularly used in drives that must be reliably braked for safety and functional reasons, such as in sawmills, centrifuges, woodworking machines, textile machines, or conveyor systems. The device operates with direct current braking via single-phase rectification and enables precise control of the braking process. The rated voltage is in the range of AC 200 to 690 V, with the auxiliary voltage being AC 230 V. The braking current is 40 A and can be adjusted up to a maximum of 600 A within the device variant. The braking time is also adjustable and can reach up to 320 seconds.

Applications

The motor brake device is designed for industrial applications where rapid and reliable braking is required. It is used in machines and systems where uncontrolled motor run-down must be avoided, such as in woodworking, the textile industry, or conveyor systems. The integrated automatic standstill monitoring ensures that the motor comes to a stop within the set braking time. If standstill is not achieved, a fault is reported via a potential-free alarm contact. This increases safety and enables quick response to malfunctions.

Functions and equipment in detail

The device features integrated standstill monitoring, continuously monitoring the motor status. In standstill-dependent braking, the braking current is switched off once standstill is reached. An alarm output signals if the motor has not stopped within the maximum braking time. Temperature monitoring is performed via a thermistor motor protection input, which can be optionally used. Additionally, star/delta control is available as an option, enabling control of motors with corresponding switching. The control terminals are plug-in, simplifying installation and maintenance.

Technology explained simply

Braking is achieved by direct current, generated via single-phase rectification and flowing through the stator winding of the motor. This results in controlled braking without mechanical wear. The external brake contactor is controlled via contact 1/2, with a safety time maintained to avoid induction voltages that could damage the power section. The supply voltage is connected to terminals L1-L2, and the interlock contact for the motor contactor closes. The ready LED indicates that the supply voltage is present. The braking DC voltage is tapped at terminals U and V.

Compatibility and accessories

The device is suitable for all asynchronous motors and can be integrated into existing systems. It features a wide voltage range (200–690 V), offering high flexibility in application. The auxiliary voltage is AC 230 V. For devices over 60 A, an external brake contactor is required. The device width is 110 mm. The device variant includes functions such as braking current monitoring, thermistor motor protection input, star/delta control, and standstill alarm relay. The plug-in control terminals simplify connection.

Mounting and installation

Mounting is done in standard control panels. Terminals L1-L2 are used for connecting the supply voltage, while terminals U and V provide the braking DC voltage for the motor windings. Contact 1/2 controls the external brake contactor. The safety time between switching off the motor contactor and switching on the brake contactor is ensured by the internal timing control. The connection terminals are clearly labeled, with functions such as interlock, fault signaling, standstill signaling, and braking current monitoring implemented via specific terminals.

Advantages in operation

The motor brake device offers higher safety through shorter run-down times and reduces maintenance effort, as it operates wear-free and maintenance-free. The simple installation, even in existing systems, increases cost-effectiveness. Adjustable parameters such as braking current and braking time allow individual adaptation to specific applications. The integrated standstill monitoring and alarm output ensure reliable operational monitoring. Compliance with the standard IEC/EN 60947-4-2 ensures adherence to relevant safety and functional requirements. UKCA approval is also available.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1001898
qrcode für Dold 0057671 GB9034/1101 40A AC50/60Hz 200-690V motor brake device UH AC230V