| Technical data |
| Approvals | UL |
| Load current up to | 50 A |
| Load voltage up to | AC 480 V |
| Number of poles | 1-pole, 2-pole, 3-pole |
| On/Off Input Control | DC |
| Width | 22,5 mm, 45 mm, 90 mm |
| Type | BF 9250/_ _8 |
| Variant |
| Auxiliary voltage | DC 9 - 32 V |
| Contact equipping | without signal contact |
| Load current | 3 x AC 15 A |
| Load voltage | AC 24 - 240 V |
| Semiconductor output | 3-pole |
| Approvals and Markings | UL-listed C/US |
| Variant | Switching at zero crossing. |
The Dold semiconductor contactor BF9250.93/008 is a 3-pole electronic switching device for noiseless and frequent control of AC loads. It is operated with an auxiliary voltage in the range DC 9–32 V and switches loads with a voltage of AC 24–240 V and a load current of 3 x AC 15 A. The device is designed in accordance with IEC/EN 60947-4-2 and IEC/EN 60947-4-3 and is suitable for use in industrial plants as well as in building automation. It is designed for zero-voltage switching, meaning that the switching operation always takes place at the zero crossing of the alternating voltage to minimize electrical interference and sparking. Control is digital via a direct voltage, making it ideal for integration into control and regulation systems.
Applications
This semiconductor contactor is designed for use in systems where noiseless and reliable switching of loads is required. Examples include heating systems, motors, valves, and lighting systems. Zero-voltage switching ensures low electromagnetic interference and extends the service life of connected devices. Due to its high switching frequency and lack of mechanical contacts, it is particularly suitable for applications where mechanical relays are limited by wear or noise.
Functions and Equipment in Detail
The device features a 3-pole semiconductor output designed for switching three phases or three separate loads. The load voltage can reach up to AC 480 V, although the specified load voltage for this type is AC 24–240 V. The maximum load current capacity is 3 x AC 15 A at an ambient temperature of 40 °C. Current reduction at higher temperatures follows the specifications in the datasheet, with performance reduced by 20 % at 40 °C compared to 25 °C. Switching is performed via electronic control connected to a DC power source through terminals A1/A2. The on-delay and off-delay are each ≤ 1 ms plus 1/2 period, ensuring precise and synchronized switching.
Technology Explained Simply
The semiconductor contactor operates using an electronic switch based on semiconductor components, rather than mechanical contacts. This enables nearly wear-free and noiseless switching. Zero-voltage switching ensures that current flow begins or ends at the zero crossing of the alternating voltage, minimizing network interference. Integrated protection circuitry using varistors protects the device against overvoltages. The green LED on the front panel lights up when voltage is applied to terminals A1/A2, visually indicating the operating status.
Compatibility and Accessories
The device is designed for use in systems with AC loads up to 480 V and is available in various widths (22.5 mm, 45 mm, 90 mm). The width of this model is 90 mm. It is mountable on a DIN rail, enabling easy integration into enclosures. The UL-listed C/US certification confirms suitability for use in the USA and Canada. Optional variants with a high I²t value of the semiconductor are available for higher switching currents, but are not part of this variant.
Mounting and Installation
Mounting is done by clipping onto a DIN rail, with the installation position required to be horizontal. Connections are clearly labeled: A1/A2 for control voltage, L1/L2/L3 for mains connections, and T1/T2/T3 for load outputs. The maximum ambient temperature is 40 °C, with current reduction required at higher temperatures. Storage is permitted in the temperature range of -20 °C to +80 °C.
Advantages in Operation
The semiconductor contactor offers high operational reliability due to the absence of mechanical contacts, which eliminates wear. Zero-voltage switching reduces electromagnetic interference and extends the service life of connected loads. The integrated LED indicator allows for quick visual verification of the operating status. The compact design and DIN rail mounting facilitate installation in existing enclosures. The UL-listed C/US certification expands application possibilities in international markets.