Dold 0057287, EAN: 4030641572877

Dold 0057287 BN9034/1000 25A motor brake unit 15S

Dold 0057287 BN9034/1000 25A motor brake unit 15S

Lieske Part No. 1001892
Mfg Part No 0057287
EAN-Code 4030641572877
Manufacturer Dold
Here only 637,56 EUR
758,70 EUR incl. VAT

Further information for Dold 0057287 BN9034/1000 25A motor brake unit 15S

Technical data
Braking current adjustable up to max.25 A
Braking time adjustable up to max.15 s
Width100 mm
TypeBN 9034
Automatic standstill monitoringYes
Signalling outputYes
Temperature monitoringYes
Variant
Auxiliary voltageAC 24 V
Braking current25 A
Braking time15 s
Nominal voltageAC 575 V
Approvals and MarkingsUKCA
VariantWide voltage input (UN = 200...575 V)
The electronic motor brake device BN 9034 from Dold, type BN9034/1000 25A UN=AC575V UH=AC24V, is a device of the MINISTOP series for wear-free braking of three-phase and alternating current asynchronous motors. It is used for safe and functional stopping of drives, particularly in industrial applications where reliable and fast braking is required. The device enables controlled braking via DC braking with single-phase rectification and integrated brake contactor, whereby the motor is braked over a defined braking time after switching off the main supply.

Applications
This motor brake device is suitable for a wide range of drive systems, including sawmills, centrifuges, woodworking machines, textile machines, and conveyor systems. It is used to reduce motor coast-down time, thereby increasing safety and improving efficiency by reducing downtime. The application is in industrial high-current installations, with devices specified according to IEC/EN 60947-4-2.

Functions and Equipment in Detail
The device features an adjustable braking time up to 15 seconds and an adjustable braking current up to 25 A. Braking can be switched off either time-dependent or via the integrated automatic standstill monitoring. In standstill-dependent braking, a potential-free alarm contact signals if the motor has not come to a stop within the maximum braking time. This enables precise monitoring of the braking process and early fault detection.

Technology Explained Simply
DC braking is achieved via a single-phase rectifier, which converts AC voltage into DC voltage, which then flows through the stator winding of the motor. This generates a magnetic field that slows down the motor. The braking time and braking current are adjustable to adapt braking performance to the specific requirements of the motor and system. The auxiliary voltage is AC 24 V, required for controlling the brake contactor and internal electronics. The rated voltage of the device is AC 575 V, designed for a wide voltage range from 200 to 575 V.

Compatibility and Accessories
The device is suitable for all asynchronous motors and can be integrated into existing systems. It is designed for snap-on mounting on a 35 mm standard rail, simplifying installation. Optional features such as star-delta starting, thermistor motor protection, or a relay for standstill monitoring can be added. The terminal connections are designed for a maximum cross-section of 2.5 mm² per terminal, and tightening is done with a maximum torque of 0.8 Nm.

Mounting and Installation
Mounting is on a 35 mm DIN rail. The supply voltage is connected to terminals L1 and L2, with the interlock contact closing for the motor contactor. The DC braking voltage is tapped from terminals T1 and T2. Control terminals X3 and X4 are live and require a switch or contactor with a test voltage of at least 2.5 kV. The ready" LED indicates that the supply voltage is present, while the "I LED lights up when braking current is flowing.

Advantages in Operation
The motor brake device offers wear-free and maintenance-free operation, increasing service life and reducing maintenance costs. The shorter coast-down time improves safety and productivity. The integrated standstill monitoring and alarm output enable precise monitoring of the braking process. The devices are designed for an operating temperature of 0 to +45 °C, with a storage temperature up to +75 °C. The protection rating IP 20 protects against contact with moving parts and against solid foreign objects larger than 12.5 mm.

Approvals and Markings
The device carries the UKCA mark, confirming compliance with applicable European safety and health regulations. The devices are designed for use in installations with overload category III and pollution degree 2, ensuring high reliability in industrial environments.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1001892
qrcode für Dold 0057287 BN9034/1000 25A motor brake unit 15S