| Technical data |
| Connection | Screw terminals |
| Enclosure design | Switch cabinet |
| Output contacts max. | 2 NC contacts, 2 NO contacts |
| Thermal current Ith max. | 8 A |
| Width | 38 mm |
| Type | HL 3094 |
| Variant |
| Contact equipping | 3 NO contacts, 1 NC contact |
| Nominal voltage | DC 24 V |
| Variant | With free-wheeling diode. Standard relay. Contact material AgNi |
The Dold coupling module HL3094.48/500 DC24V is an industrial-grade relay module for contact multiplication and amplification in control systems. It serves as a cost-efficient alternative to auxiliary contactors and enables monitoring of the switching state via forced-guided openers. The device is designed for use in enclosures and features a width of 38 mm, making it suitable for standard DIN rail mounting. The rated voltage is DC 24 V, and the module is equipped with a freewheeling diode between terminals A1/A2 to safely switch inductive loads. The contact material consists of AgNi, supplemented with a gold layer of 0.2 μm, ensuring high contact reliability and long service life.
Coupling module
The coupling module HL3094.48/500 DC24V is specifically designed for integration into industrial control systems. It enables the connection of multiple circuits via a single control impulse, thereby reducing the number of required relays or contactors. The contact configuration includes 3 closers and 1 opener, with a maximum number of output contacts being 2 closers and 2 openers. The forced-guided contacts in accordance with DIN EN 61810-3 (Type A) ensure that the opener opens automatically when the relay is actuated, enhancing operational state monitoring safety.
Functions and equipment in detail
The module features screw terminals as the connection technology, ensuring a secure and mechanically stable connection. The maximum thermal continuous load is 8 A, suitable for operation with high loads. The contact type is designed as a spring contact, enabling reliable switching performance even under mechanical stress. The pickup time is up to 40 ms (typically 27 ms), and the drop-out time is up to 10 ms (typically 5 ms), suitable for fast switching operations in control systems.
Technology explained simply
The freewheeling diode between A1/A2 protects the relay from inductive voltage spikes that occur when switching inductive loads (e.g. electric motors, coils). The contact material combination AgNi + 0.2 μm Au provides good electrical conductivity and resistance to oxidation, increasing service life. The operating temperature range extends from -40 °C to +55 °C, making the module suitable for use in industrial environments with significant temperature fluctuations.
Compatibility and accessories
The coupling module is equipped with a soldered-in safety relay. As an alternative, a plug-in safety relay HA 5601 is available, which can be inserted into the socket HL 3094/10_. Compatibility with other modules in the series (e.g. HO 3094, HO 3095) is ensured by the standardized socket. The switching function complies with standards IEC/EN 61810-1, IEC 60664-1, and IEC/EN 60947-5-1, ensuring compliance with safety and quality standards.
Mounting and installation
Mounting is done either on DIN rails or via screw mounting, with the width of 38 mm enabling integration into standard enclosures. The connection terminals are clearly labeled (A1+, A2, contact numbers), simplifying installation. The rated power consumption is 0.75 W, ensuring energy-efficient operation.
Advantages in operation
Through contact multiplication and amplification, the module reduces the number of components required in the control system, saving space and costs. The forced-guided contacts enable secure state monitoring, improving fault detection and diagnostics during operation. The high thermal continuous load capacity of 8 A and robust construction ensure reliable performance even under demanding operating conditions.
Standards and approvals
The device complies with standards DIN EN 61810-1, IEC 60664-1, and IEC/EN 60947-5-1. The forced-guided contacts are designed in accordance with IEC 61810-3 (Type A), ensuring the reliability of the switching function. The switching capacity for AC 15 is 3 A / AC 230 V for closers and 2 A / AC 230 V for openers. The electrical service life exceeds 200,000 switching operations at 8 A and AC 230 V, enabling high operational reliability over a long period.