Further information for Dold 0057001 BF9250.01 semiconductor contactor AC/DC24V
Technical data
Approvals
UL
Load current up to
50 A
Load voltage up to
AC 480 V
Number of poles
1-pole, 2-pole, 3-pole
On/Off Input Control
AC/DC, DC
Width
22,5 mm, 45 mm, 90 mm
Type
BF 9250
Signalling output
Temperature monitoring
Variant
Auxiliary voltage
AC/DC 24 V
Contact equipping
with signal contact
Load current
AC 25 A
Load voltage
AC 24 - 480 V
Semiconductor output
1-pole
Approvals and Markings
UL-listed C/US
Variant
Switching at zero crossing.
The Dold semiconductor contactor BF9250.01 UH=AC/DC24V AC25A is a semiconductor contactor for use in industrial plants, particularly for noiseless and frequent switching of loads such as heaters, motors, valves and lighting. The device is based on power semiconductor technology and is designed for operation with an auxiliary voltage of AC/DC 24 V. It features a 1-pole semiconductor output and is specified for load voltages in the range of AC 24 to 480 V and a load current of AC 25 A. The maximum load current capacity is up to 50 A, with the specified variant designed for 25 A. Switching is performed zero-voltage switching, meaning the switching process occurs at the zero-crossing point of the alternating voltage to minimize electrical interference and switching arcs.
Applications include industrial controls where high switching frequency and noise reduction are required. The device is particularly suitable for applications where mechanical relays are no longer appropriate due to their mechanical movements, such as in environments with high vibration loads or high switching cycles. The temperature monitoring of the power semiconductor is integrated and protects the device against overheating. When a critical temperature is reached, an alarm output is activated, visually indicated by a red LED (J>). This enables early reaction to malfunctions or overloads.
Functions and equipment in detail include the ability to control the device via control input X1 with low current consumption, making it particularly suitable for control by PLC systems. Protection is provided by varistors, which suppress overvoltages in the network and protect the device against transient voltage spikes. Control is digital via AC/DC or DC, enabling integration into various control systems. The width is 22.5 mm, allowing compact mounting on a DIN rail. The devices comply with IEC/EN 60947-4-2 and IEC/EN 60947-4-3 standards and carry the UL-listed C/US approval, enabling use in specific markets, particularly in North America.
Technology explained simply shows that the device has no moving contacts, but operates via semiconductors (e.g. thyristors or triacs) that are electrically controlled. This results in a long service life and low maintenance. Zero-voltage switching reduces electromagnetic interference and extends the life of the load. Temperature monitoring with alarm output enables proactive fault detection. LED indicators (green for operating voltage, yellow for control input, red for overheating) provide visual feedback on the operating status.
Compatibility and accessories include use in 1-, 2- and 3-pole versions, with the variant described here being 1-pole. The width of 22.5 mm allows mounting in standard DIN rail distribution boxes. The devices are designed for use in industrial environments, with no specific environmental conditions such as temperature or humidity ranges specified.
Mounting and installation is done by clipping onto a DIN rail, enabling quick and secure installation in enclosures. Terminal markings are standardized: A1/A2 for control or operating voltage, X1 for optional control input, 18 for alarm output, 11/12 for normally open contact, L1/L2/L3 for mains connections, and T1/T2/T3 for load outputs. Wiring is carried out according to the circuit diagrams included in the datasheet.
Operational advantages include high switching frequency, noise reduction, low maintenance and high reliability. The integrated temperature monitoring increases safety and extends the device's service life. Compatibility with PLC systems and easy mounting on DIN rail facilitates integration into existing control systems. The device is designed for use in industrial plants where reliable and low-maintenance switching functions are required.