Further information for Dold 0056975 GB9034 100A AC50/60HZ 400V motor brake unit
Technical data
Braking current adjustable up to max.
600 A
Braking time adjustable up to max.
320 s
Width
110 mm
Type
GB 9034
Automatic standstill monitoring
External brake contactor required
Signalling output
Temperature monitoring
Variant
Auxiliary voltage
Without
Braking current
100 A
Nominal voltage
AC 400 V
Approvals and Markings
UKCA
The electronic motor brake device GB 9034 of the MINISTOP series by Dold is a device for wear-free braking of three-phase and alternating current asynchronous motors. It is used for safe and functionally correct braking of drives that must be reliably brought to a standstill for safety or operational reasons. The device operates on the principle of direct current braking with single-phase rectification and is designed for a rated voltage of AC 400 V. The braking current is 100 A and is adjustable up to 600 A, allowing flexible adaptation to different motor powers.
Applications
This motor brake device is designed for industrial applications, particularly in areas such as sawmills, centrifuges, woodworking machines, textile machines, and conveyor systems. It enables shorter coast-down times, increasing safety and improving operational efficiency. The device is used in installations where a fast and controlled stop of the motor is required, such as during emergency shutdowns or within automation processes.
Functions and Equipment in Detail
The device features automatic standstill monitoring, which monitors the motor status and switches off the braking current once standstill is reached. Alternatively, the braking process can be ended after a set braking time of up to 320 seconds. In standstill-dependent braking, a potential-free signal contact indicates if the motor has not come to a stop within the maximum braking time, supporting fault detection and process safety. Temperature monitoring protects the device and the motor from overheating.
Technology Explained Simply
The braking function is achieved by feeding a direct voltage into the stator winding of the motor, creating a magnetic field that slows down the motor. The supply voltage is connected at terminals L1–L2, and the braking direct voltage is taken from terminals U and V. The external brake contactor is controlled via contact 1–2. A safety time ensures that the motor contactor has fully dropped out before the braking current flows, preventing induced voltages that could damage the power section. The device width is 110 mm.
Compatibility and Accessories
The device is suitable for all asynchronous motors. It requires an external brake contactor, as the integrated brake contactor is only available in devices up to 60 A. The device variant without auxiliary voltage is specified here. Functions such as standstill monitoring, temperature monitoring, and signal output are integrated. Compliance with the standard IEC/EN 60947-4-2 ensures electrical safety and reliability.
Mounting and Installation
Mounting is carried out in existing installations or new control panels. Terminal designations are clearly defined: L1–L2 for supply voltage, U–V for braking direct voltage, 1–2 for the external brake contactor, and 8–9 for motor contactor interlocking. The connection terminals allow for a secure and reliable connection. LED indicators signal the operating status, such as “ready” for supply voltage or the flow of braking current.
Advantages in Operation
The device is wear-free and maintenance-free, reducing operating costs and increasing availability. Easy integration into existing installations reduces installation effort. Adjustable parameters such as braking current and braking time allow customized adaptation to specific applications. The integrated standstill monitoring and signal output support process safety and fault diagnosis. The UKCA certification confirms compliance with applicable European safety requirements.