| Technical data |
| Approvals | UL |
| Load current up to | 50 A |
| Load voltage up to | AC 480 V |
| Number of poles | 1-pole, 2-pole, 3-pole |
| On/Off Input Control | DC |
| Width | 22,5 mm, 45 mm, 90 mm |
| Type | BF 9250/_ _8 |
| Variant |
| Auxiliary voltage | DC 4 - 32 V |
| Contact equipping | without signal contact |
| Load current | AC 10 A |
| Load voltage | AC 24 - 480 V |
| Semiconductor output | 1-pole |
| Approvals and Markings | UL-listed C/US |
| Variant | Switching at zero crossing. |
The Dold semiconductor contactor BF9250.91/008 UH=DC4-32V AC10A is a
1-pole electronic switching device for use in industrial installations. It is designed for
frequent and noiseless switching of loads such as heaters, motors, valves, and lighting. The device operates as a
semiconductor contactor with
zero-voltage switching behavior, ensuring switching operations occur at the voltage zero crossing to minimize electrical interference and wear. Control is achieved via a
digital control voltage in the range DC 4 to 32 V, while the operating voltage is supplied through terminals A1/A2. The load voltage range is
AC 24 to 480 V, and the maximum load current is
AC 10 A at an ambient temperature of 40 °C. The width is
22.5 mm, enabling compact mounting on a DIN rail.
Applications
This device is designed for use in industrial and technical installations where reliable, interference-free, and maintenance-free switching functions are required. It is particularly suitable for applications where mechanical relays would cause wear or noise due to their moving parts. The zero-voltage switching ensures low electromagnetic compatibility (EMC) and reduces stress on connected loads. The switching function is designed for
AC loads, with a load voltage up to
480 V. The operating temperature range is
0 to 40 °C, with the maximum device temperature reaching 60 °C, requiring current derating above 40 °C.
Functions and Features in Detail
The semiconductor contactor includes
protection circuitry using varistors, safeguarding against overvoltages. The varistor voltage is
AC 510 V, providing effective protection against transient voltage surges. The turn-on and turn-off delay is each
≤ 1 + 1/2 cycle, with the 1/2 cycle omitted in the instant-switching variant. The minimum load current is
AC 40 mA, enabling reliable switching even at low loads. The leakage current in the off state is approximately
1.0 mA. The peak blocking voltage is
± 1200 Vp, ensuring high electrical insulation.
Technology Explained Simply
The device operates as a
semiconductor contactor, i.e., an electronic switch without moving parts. Switching is performed using semiconductor components activated by a control voltage. The
zero-voltage switching ensures the switch only operates when the network voltage is at zero, extending the life of both the load and the device. The
varistors protect the device from sudden voltage spikes caused by network disturbances or load switching. The
DIN rail mounting allows for quick and secure installation in enclosures.
Compatibility and Accessories
The device is available in various configurations, including
1-pole, 2-pole, and 3-pole, with widths of 22.5 mm, 45 mm, or 90 mm. The load voltage can reach up to
AC 480 V, and the load current can be up to
50 A at an ambient temperature of 25 °C. Certifications include
UL-listed C/US, enabling use in the USA and Canada. The devices comply with standards
IEC/EN 60947-4-2 and IEC/EN 60947-4-3. An optional variant with a high I²t value of the semiconductor is available for high switching currents.
Mounting and Installation
The device is
snap-mounted onto a DIN rail, allowing for easy and secure installation in enclosures. The mounting orientation is horizontal, and the rated operating mode is continuous duty. Terminals are clearly labeled: A1/A2 for control voltage, L1/L2/L3 for supply connections, and T1/T2/T3 for load outputs. Installation requires no additional tools, as the device snaps directly onto the rail.
Operational Advantages
The semiconductor contactor provides a
noiseless switching function without mechanical movement. The
zero-voltage switching reduces electromagnetic interference and extends the life of connected loads. The
varistors protect the device from overvoltages. The
DIN rail mounting enables quick installation. The
UL-listed C/US certification permits use in the USA and Canada. Compliance with
IEC/EN 60947-4-2 and IEC/EN 60947-4-3 standards ensures the safety and reliability of the device.