| Technical data |
| Enclosure design | Switch cabinet |
| Output contacts max. | 2 C/O contacts |
| Thermal current Ith max. | 6 A |
| Width | 22,5 mm |
| Type | MK 8852 |
| Variant |
| Contact equipping | 2 changeover contacts |
| Nominal voltage | AC/DC 24 V |
The toggle relay MK8852.12 AC/DC24V from Dold is a bistable relay designed for use in industrial enclosures, which securely maintains the respective switching state of the contacts even in the event of power failure. It features a contact configuration with two changeover contacts and is rated for a nominal voltage of AC/DC 24 V. The device is designed for impulse operation, where the switching position is set by short current pulses applied to terminals A1–A2 (set pulse) or A3–A2 (reset pulse). After impulse actuation, the switching state remains permanently maintained without requiring holding power. In the event of a fault, continuous excitation is permissible, although simultaneous energizing of coils A1 and A3 is not allowed.
Applications
This toggle relay is suitable for applications requiring secure memory function of the switching position, for example in automation systems, safety controls, or emergency shutdowns. Its ability to retain the state even during power failure makes it particularly suitable for critical processes where uncontrolled return to the initial position must be avoided.
Functions and Features in Detail
The device features an integrated manual actuator on the front panel, which also serves as a switching position indicator. This allows the current contact position to be visually checked from outside, facilitating maintenance and diagnostics. Manual switching enables changing the switching state without electrical actuation, which is useful during maintenance or in emergencies. The contact configuration includes two changeover contacts, each with a fixed and a movable contact, to support flexible switching operations.
Technology Explained Simply
The toggle relay operates on a bistable relay principle with two coils. After a pulse applied to A1–A2, the contact is moved to one position and remains there until a pulse on A3–A2 triggers reset. The minimum pulse duration is 30 ms, with a recommended pulse duration of 0.03 to 2 seconds for cyclic operation. The permissible switching frequency is 3600 operations per hour. The response and release time of the contacts is 10 ms (typical) each. The thermal current Ith is 6 A, indicating the maximum continuous current load. The rated operating voltage is AC 250 V.
Compatibility and Accessories
The relay is designed for mounting on a DIN rail and complies with the standard IEC/EN 60947-5-1. The width is 22.5 mm, making it suitable for standard enclosure installations. The connection terminals are designed for connection to control wiring, with signals A1 (set pulse), A3 (reset pulse), and A2 (reference potential) clearly defined. The contacts are configured as changeover contacts (11, 12, 14; 21, 22, 24), enabling use in various switching configurations.
Mounting and Installation
Mounting is done via DIN rail, with the width of 22.5 mm fitting standard enclosures. The connection terminals are designed for connection to control wiring, with polarity and function of terminals (A1, A2, A3) to be observed according to technical documentation. The front panel with the manual actuator allows for easy visual inspection and manual operation.
Operational Advantages
The toggle relay MK8852.12 is energy-saving, as no holding power is required. The switching position is visible from outside, simplifying diagnostics and maintenance. Manual switching enables flexible operation even without electrical actuation. The high mechanical life of 10 million switching operations and electrical life of over one million switching operations at 6 A/AC 230 V make the device suitable for long-term use. The operating temperature range is from -25 °C to +50 °C, enabling use in demanding climatic environments. Short-circuit resistance is ensured with a maximum fuse rating of 6 A gG/gL.
Permissible Operating Conditions
The device is designed for operating temperatures from -25 °C to +50 °C and can be used up to an altitude of 2000 m above sea level. The rated insulation voltage is AC 250 V, and the rated impulse voltage is 4 kV at pollution degree 2. Electromagnetic compatibility (EMC) complies with requirements according to IEC/EN 61000-4-2 (ESD: 8 kV air discharge) and HF radiation (80 MHz to 2.7 GHz: 10 V/m).