Dold 0054984, EAN: 4030641549848

Dold 0054984 BI9028.38 3AC200-480V UHAC230,DC24V soft start brake unit 7.5 kW

Dold 0054984 BI9028.38 3AC200-480V UHAC230,DC24V soft start brake unit 7.5 kW

Lieske Part No. 1002105
Mfg Part No 0054984
EAN-Code 4030641549848
Manufacturer Dold
Here only 610,43 EUR
726,41 EUR incl. VAT

Further information for Dold 0054984 BI9028.38 3AC200-480V UHAC230,DC24V soft start brake unit 7.5 kW

Technical data
Extra functionsMains monitoring, Temperature monitoring
For three-phase motors, 400 V up to15 kW
Load voltage up to3AC 480 V
Width90 mm
TypeBI 9028
Auxiliary voltage requiredYes
Signalling outputYes
Variant
Auxiliary voltageAC 230 V, DC 24 V
Contact equipping2 x 1 changeover contact
Mains / motor voltage3AC 200 - 480 V
Nominal motor power7,5 kW
Approvals and MarkingsUKCA
VariantControl input X1+/X2
The Dold BI9028.38 is an electronic soft starter with integrated braking function, specifically designed for use in industrial drive systems. It is used for smooth acceleration and controlled braking of three-phase and asynchronous motors with a rated power up to 7.5 kW at a supply voltage of 3AC 200–480 V. The device enables jerk-free start-up and protects the mechanical components of the drive from damage caused by sudden starting torques. Control is performed via a galvanically isolated control input X1+/X2, which supports voltages up to AC/DC 230 V. The auxiliary voltage can be either AC 230 V or DC 24 V, with power supply via terminals A1/A2 (mains) or A3(+)/A4 (DC 24 V).

Applications
This device is suitable for machines with gear, belt, or chain drives, including conveyor belts, fans, pumps, compressors, woodworking machines, centrifuges, packaging machines, and door drives. It is used in industrial environments where controlled motor control is required to minimize mechanical stress and extend the service life of drive components.

Functions and Features in Detail
The BI9028.38 provides a 2-phase motor control, where two motor phases are controlled via thyristors to gradually increase current and torque. This ensures a smooth start and prevents mechanical stress. The start and brake time, as well as the start and brake torque, can be adjusted independently. Integrated mains monitoring detects phase loss and incorrect phase sequence. Additionally, temperature monitoring is optionally available, with a thermistor connectable to inputs P1/P2/P3. The device features two alarm relays, each with 1 changeover contact (2 x 1 changeover contact), used for status and fault indication. LED indicators signal the operating status: a green LED lights up when auxiliary voltage is connected, and a yellow LED indicates the status of the alarm relays.

Technology Explained Simply
Control is achieved via phase-angle control, where the voltage to two motor phases is regulated to gradually increase current flow and thus torque. This results in a jerk-free start. The braking function is also achieved by controlling the thyristors, allowing the motor to be braked in a controlled manner. The galvanic isolation of the control input protects the control system from disturbances caused by external voltages. The auxiliary voltage is required to operate the electronic control functions.

Compatibility and Accessories
The device is designed for 3-phase motors, which can reach up to 15 kW at 3 AC 400 V. The width is 90 mm, enabling space-saving installation in enclosures. It is compliant with IEC/EN 60947-4-2 and carries the UKCA mark. The load voltage can reach up to 3AC 480 V. The integrated mains monitoring and optional temperature monitoring increase operational safety. Control is performed via terminals X1+/X2, with start and stop signals connected to terminals X1 and X3.

Mounting and Installation
The device is mounted in an enclosure and connected via the designated terminals. Motor connections are made to T1, T2, and T3, and mains connections to L1, L2, and L3. The auxiliary voltage is connected to A1/A2 (AC 230 V) or A3(+)/A4 (DC 24 V). Control is performed via X1 (start) and X3 (stop). The alarm relays are connected to terminals 11–12–14 and 21–22–24. The LED indicators serve for visual monitoring of the operating status.

Advantages in Operation
The device reduces mechanical stress during start-up and braking, extending the service life of drive components. Simple wiring and integrated functions such as mains and temperature monitoring reduce installation and maintenance effort. The space-saving design with a width of 90 mm allows compact installation in existing enclosures. The galvanic isolation of the control input increases immunity to interference. The integrated braking function eliminates the need for a separate brake contactor.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1002105
qrcode für Dold 0054984 BI9028.38 3AC200-480V UHAC230,DC24V soft start brake unit 7.5 kW