Further information for Dold 0054861 IK8701.12 AC/DC230V relay
Technical data
Enclosure design
Distribution board
Output contacts max.
2 C/O contacts
Thermal current Ith max.
16 A
Width
17,5 mm
Type
IK 8701
Initiator triggering
Suppressor circuit on the coil input
Variant
Contact equipping
2 changeover contacts
Nominal voltage
AC/DC 230 V
The Dold switching relay IK8701.12 AC/DC230V is an industrial coupling relay for use in control and automation technology. It serves as an input or output coupling relay, for example, for actuating PLC systems or controlling PLC-controlled loads. The device features a contact configuration with 2 changeover contacts and is designed for a rated voltage of AC/DC 230 V. The width is 17.5 mm, making it suitable for installation in standard installation distributors. It complies with the standard EN 60947-5-1, which defines requirements for switching devices for control technology.
Applications
This relay is specifically designed for use in industrial and technical installations where reliable switching function is required for different types of loads. It is suitable, for example, for switching lamp loads, particularly in installations with parallel compensation such as HQ lamps. As an input coupling relay, it can be used for signal transmission from sensors or switches to PLC systems, while as an output coupling relay, it can control loads such as motors, heaters, or electric drives. The design also allows actuation via 2-wire initiators, with an allowable residual current ≤ 3 mA.
Functions and Equipment in Detail
The device features a button for manual actuation of the contacts, which also serves as a switching position indicator. When energized, the button is pushed in; when de-energized, it flushes with the front edge. This function enables visual control of the switching state without additional measuring instruments. The contacts are equipped with protective circuitry at the coil input to protect against overvoltage. The maximum thermal current rating (Ith) is 16 A, ensuring high load capacity under continuous operating stress.
Technology Explained Simply
The relay operates with a toggle armature that actuates the contacts via a plunger. When the excitation voltage drops, the armature is returned to its resting position by a spring. The contact arrangement as changeover contacts allows switching between two switching states, providing flexible control options. Actuation is performed via terminals A1/A2, with polarity defined for AC/DC voltages.
Compatibility and Accessories
The relay is designed for use in standard installation distributors with a width of 17.5 mm. It can be used in combination with other devices from the IK series, with specific variants such as IK8701.12/005 (with gold plating for small loads) or IK8701.12/007 (for lamps with parallel compensation) offered as optional versions. Actuation via 2-wire initiators is possible, with the maximum number of parallel-connected neon lamps (0.5 mA per lamp) limited to six.
Mounting and Installation
The device is mounted in standard installation distributors with a 35-mm rail. The width of 17.5 mm allows for compact placement. The connection terminals are clearly labeled (A1/A2 for control signal, 11/12/14 etc. for output contacts), ensuring unambiguous wiring. Mounting is done via plug-in connection, with mechanical stability ensured by the design of the installation distributor.
Advantages in Operation
The relay offers high operational reliability due to the integrated protective circuitry at the coil input and high thermal current rating. The manual actuation button enables simple diagnosis and testing during operation. Compatibility with 2-wire initiators and the ability to actuate PLC systems make it a flexible component in industrial control systems. Compliance with the standard EN 60947-5-1 ensures reliability and safety in industrial applications.