Further information for Dold 0054441 semiconductor contactor 2xAC6,5A
Technical data
Approvals
UL
Load current up to
50 A
Load voltage up to
AC 480 V
Number of poles
1-pole, 2-pole, 3-pole
On/Off Input Control
AC/DC, DC
Width
22,5 mm, 45 mm, 90 mm
Type
BF 9250
Signalling output
Temperature monitoring
Variant
Auxiliary voltage
AC/DC 110 - 230 V
Contact equipping
with signal contact
Load current
2 x AC 6,5 A
Load voltage
AC 24 - 480 V
Semiconductor output
2-pole
Approvals and Markings
UL-listed C/US
Variant
Switching at zero crossing.
The Dold semiconductor contactor BF9250.02 is an electronic switching device for use in industrial plants, designed for noiseless and frequent switching of loads such as heaters, motors, valves, and lighting. It features a 2-pole semiconductor output and is designed for an auxiliary voltage range of AC/DC 110–230 V. The load voltage is AC 24–480 V, with a load current per pole of 6.5 A. The device is zero-voltage switching, meaning the switching operation occurs at the zero-crossing point of the alternating voltage to minimize current surges and electrical interference. Switching is performed via semiconductors, eliminating mechanical contacts and thus avoiding wear and noise.
Applications
The BF9250.02 is suitable for applications requiring high switching frequency and disturbance-free operation. Typical uses include controlling heating systems, drive motors, pneumatic or hydraulic valves, and lighting installations in production environments. Zero-voltage switching ensures gentle load activation, which is particularly beneficial for inductive loads such as motors. The devices are designed for use in industrial control and automation systems.
Functions and Equipment in Detail
The device includes an integrated alarm output connected via terminal 18, which signals during operation or malfunction. Additionally, an integrated temperature monitoring system protects the power semiconductors and sends a signal state to the alarm output in case of overheating. The monitoring is latching, meaning the state remains stored until the supply voltage is briefly interrupted. Control is achieved via terminals A1/A2, with an optional control input X1 available with low current consumption, suitable for control via a PLC (Programmable Logic Controller).
Technology Explained Simply
Switching is performed via semiconductors acting as electronic switches. Unlike mechanical relays or contactors, there are no moving parts, increasing service life and eliminating noise. Zero-voltage switching minimizes electrical interference and load stress. The integrated temperature monitoring protects semiconductors from overheating, which is especially important during frequent switching or high loads. Protection circuitry using varistors safeguards the device against overvoltages caused by switching operations or network disturbances.
Compatibility and Accessories
The BF9250.02 is available in various versions, including 1-pole, 2-pole, and 3-pole variants, with widths of 22.5 mm, 45 mm, or 90 mm. It is designed for mounting on a DIN rail, enabling easy integration into enclosures. The devices comply with standards IEC/EN 60947-4-2 and IEC/EN 60947-4-3, applicable to semiconductor contactors. Certifications include UL-listed C/US, enabling use in the USA and Canada. The load voltage up to AC 480 V and load current up to 50 A (depending on variant) make the device suitable for a wide range of industrial applications.
Mounting and Installation
Mounting is done by snapping onto a DIN rail, allowing quick and secure installation in enclosures. The connection terminals are clearly labeled: L1, L2, L3 for power connections, T1, T2, T3 for load outputs, A1/A2 for control voltage, and X1 for the optional control input. Terminal 18 serves as the alarm output. The terminals are designed for secure connections, with the exact connection type varying by model. The devices are intended for use in enclosed enclosures.
Advantages in Operation
Operation of the BF9250.02 is noiseless and allows high switching frequency without mechanical wear. Zero-voltage switching reduces electrical interference and extends the life of connected loads. The integrated temperature monitoring and alarm output enhance operational safety by enabling early detection of malfunctions. The low current consumption of control input X1 allows direct control via PLC systems, simplifying integration into automation systems. The UL-listed C/US certification expands the application scope in North American markets.