Further information for Dold 0054361 IK7817N.81/500 AC/DC12-240V multifunction relay
Technical data
Enclosure design
Distribution board
Output contacts
1 C/O contact
Time function(s)
Cyclic timer, Flasher relay, Fleeting on break, Fleeting on make, Fleeting on make and brake, Impulsgeber, Off-delay, with control signal, On- and Off-delay, On-delay, Pulse extender
Width
17,5 mm
Type
IK 7817N/200
Connection facility for remote potentiometer
Variant
Contact equipping
1 changeover contact
Nominal voltage
AC/DC 12 - 240 V
Time range
0,02 s - 300 h
Approvals and Markings
UKCA
Variant
Connection facility for external potentiometer (t1)
The Dold multifunction relay IK7817N.81/500 AC/DC12-240V is a time-dependent control device for use in industrial and railway applications. It has a width of 17.5 mm and is designed for mounting in installation distributors according to DIN 43 880. The device enables flexible process control through eight different time functions, which can be set using a rotary switch. The functions include delay-on-make, make-wipe function, delayed pulse generator, flashing function with start by pulse, delay-on-break, pulse shaper, break-wipe function, and delay-on-make and delay-on-break. Additionally, the /500 variant offers two extended functions: pulse generator with start by pause and make/break-wipe function. The time ranges are adjustable in eight steps from 0.02 seconds to 300 hours, with an integrated setting aid for quick adjustment of long times.
Applications
This relay is designed for applications in industrial automation, transportation technology, and switchgear where time-controlled sequences are required. It is suitable, for example, for controlling lighting systems, motors, pumps, or for synchronizing machine functions. Control is achieved via two-wire proximity switches, and for operating voltages above 24 V and when using proximity switches without built-in short-circuit protection, a series resistor for current limitation is recommended. The maximum resistance values are 270 Ω at 48 V, 390 Ω at 60 V, 680 Ω at 110 V, and 1.8 kΩ at 230 V.
Functions and Equipment in Detail
The device features a changeover contact as output contact, suitable for controlling loads. The functions can be selected via a rotary switch, with time sequences defined by setting the time ranges. The functions include, among others, delay-on-make (AV), delay-on-break (RV), flashing function (BI), and pulse shaper function (IF). The /500 variant additionally offers the functions pulse generator with start by pause (TP) and make/break-wipe function (EW/AW). Time sequence interruption and time addition enable flexible control of complex sequences. The setting of time t1 is done via a rotary switch, and for the /500 variant, a second time setting t2 is available for the pulse generator and make/break-wipe functions.
Technology Explained Simply
The time functions are selected via a rotary switch, which enables eight different operating modes. The time sequences are defined by setting the time ranges from 0.02 s to 300 h. Functions such as delay-on-make or delay-on-break ensure that the output contact switches only after the set time has elapsed. The flashing function generates periodic on/off switching of the contact, with pulse and pause times adjustable separately. The pulse shaper function allows short signals to be converted into longer pulses. The LED indicators signal the operating voltage (green LED) as well as the state of the output relay and the time sequence (yellow LED). The yellow LED shows steady illumination when the relay is activated, and flashing (short on, long off) indicates that the relay is not activated but the time sequence is running.
Compatibility and Accessories
The relay is designed for operating voltages in the range AC/DC 12 to 240 V. Control is via input B1, which operates with a potential relative to A2. The terminal clamps are designed for mounting in installation distributors according to DIN 43 880. The /500 variant offers a connection for a remote potentiometer (10 kΩ) to set time t1, allowing time sequences to be adjusted externally via a potentiometer. Mounting is either via DIN rail or by screw mounting.
Mounting and Installation
The device is designed for mounting in installation distributors according to DIN 43 880 and can be fixed either via DIN rail or by screw mounting. The width is 17.5 mm, and the depth is 59 mm. The terminal clamps are located at the bottom of the device. During installation, note that for operating voltages above 24 V and when using proximity switches without short-circuit protection, a series resistor should be installed at connection A1 to limit the inrush current. The size of the series resistor depends on the operating voltage and the maximum switching current of the proximity switch.
Advantages in Operation
The multifunction relay offers high flexibility through its eight adjustable time functions and a wide time range from 0.02 seconds to 300 hours. The LED indicators facilitate diagnosis and monitoring of the operating status. Control via two-wire proximity switches enables easy integration into existing systems. The /500 variant offers additional functions such as pulse generator and make/break-wipe function, suitable for more complex control tasks. The connection for a remote potentiometer allows external adjustment of time sequences, which is advantageous for maintenance and process adaptation. The device complies with the standard IEC/EN 61812-1 and bears the UKCA mark.