Dold 0054183, EAN: 4030641541835

Dold 0054183 phase sequence relay MK9056N.12 380-500V

Industrial Material > Industrial relays and contactors > Switching units / measuring, control relay

Dold 0054183 phase sequence relay MK9056N.12 380-500V

Lieske Part No. 257403
Mfg Part No 0054183
EAN-Code 4030641541835
Manufacturer Dold
Here only 150,57 EUR
179,18 EUR incl. VAT

Further information for Dold 0054183 phase sequence relay MK9056N.12 380-500V

General
ManufacturerDold
FunctionPhase sequence monitoring
Power supply type3-phase
Nominal voltage380–500 V
Nominal frequency50/60 Hz
Voltage range0,9–1,1 × UN
Rated consumptionca. 2 W
Output2 changeover contacts
Response time< 100 ms
Reset time< 50 ms
Thermal current Ith5 A
Switching capacity normally open contact (NO)3 A at AC 230 V
Switching capacity normally closed contact (NC)1 A at AC 230 V
Type of fuse4 A gG/gL
Mechanical life> 20 × 10⁶ Switching operations
Mounting width22,5 mm
Operation temperature−20 to +60 °C
Operating altitude< 2000 m
Rated surge voltage4 kV
Pollution degree2
The Dold phase sequence relay MK9056N.12 AC50/60HZ 380-500V (manufacturer's part number 0054183) is a specialized monitoring device for three-phase AC power systems. It continuously monitors the phase sequence L1-L2-L3 and responds to incorrect or missing phase sequences to prevent damage to connected motors or machinery. The device is designed for operating voltages in the range of 3 AC 380 to 500 V and frequencies of 50/60 Hz, and is suitable for industrial applications where correct phase sequence is critical for the safe operation of drives and electrical equipment.

Applications
This relay is used in industrial plants where three-phase motors or other phase-dependent loads are operated. Typical applications include pumps, fans, conveyor systems, or production machines, where incorrect phase sequence can lead to wrong rotation direction, mechanical wear, or even severe damage. The device is designed for use in enclosures and control systems, where it is typically integrated together with other protection and control components.

Functions and Features in Detail
The phase sequence relay monitors the phase sequence in real time and switches via two changeover contacts as soon as a deviation from the specified sequence L1-L2-L3 is detected. The response time is less than 100 ms, enabling a rapid reaction to disturbances. The reset time is under 50 ms, allowing the device to quickly reactivate once the correct phase sequence is restored. Voltage range monitoring is performed within 0.9 to 1.1 times the rated voltage, ensuring the device only activates when sufficient voltage and correct phase sequence are present.

Technology Explained Simply
The device operates with a rated voltage of 3 AC 380–500 V and a frequency of 50/60 Hz. The rated power consumption is approximately 2 W, indicating low energy demand on the network. The output contacts are configured as two changeover contacts, allowing flexible use in circuits for signal transmission or load disconnection. Switching capacities are 3 A at AC 230 V for make contacts and 1 A at AC 230 V for break contacts, sufficient for controlling auxiliary contacts or small loads. The thermal current rating (Ith) is 5 A, indicating the maximum continuous current load. The mechanical life exceeds 20 million switching operations, indicating high operational reliability and durability.

Compatibility and Accessories
The relay is designed for use in industrial control panels and can be combined with other protection and control devices. It is equipped with a 4 A gG/gL fuse, ensuring electrical protection for the device and the connected circuit. The width is 22.5 mm, enabling mounting on standard DIN rails (35 mm). Dimensions are 90 mm (length) × 22.5 mm (width) × 97 mm (height), allowing it to fit in standard enclosures.

Mounting and Installation
Mounting is done on a DIN rail (35 mm), commonly found in enclosures. Electrical connections are made via the designated terminal blocks. The operating temperature range is from −20 °C to +60 °C, allowing use in demanding climatic environments. The operating altitude is limited to below 2000 m. The rated impulse withstand voltage is 4 kV at pollution degree 2, describing the electrical strength and environmental resistance of the device.

Operational Advantages
Thanks to its fast response and reset times, as well as its high mechanical life, the relay provides a reliable and low-maintenance monitoring solution. The integrated fuse increases the safety of the entire circuit. The compact design and DIN rail mounting simplify installation and integration into existing systems. Voltage range monitoring ensures the device only activates when sufficient voltage is present, enhancing reliability.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/257403
qrcode für Dold 0054183 phase sequence relay MK9056N.12 380-500V