Further information for Dold 0054082 IK8701.12 AC50HZ 400V relay
Technical data
Enclosure design
Distribution board
Output contacts max.
2 C/O contacts
Thermal current Ith max.
16 A
Width
17,5 mm
Type
IK 8701
Initiator triggering
Suppressor circuit on the coil input
Variant
Contact equipping
2 changeover contacts
Nominal voltage
AC 400 V 50 Hz
The Dold switching relay IK8701.12 AC50HZ 400V is an industrial coupling relay for use in control and automation technology. It serves as an input or output coupling relay, for example, for driving PLC systems or for controlling PLC-controlled loads. The device is specifically designed for use in installation distributors and features a width of 17.5 mm, making it suitable for compact mounting in enclosures. The rated voltage is AC 400 V at 50 Hz, with the coil protected against overvoltage via a protective circuit at the input. The contact configuration includes two changeover contacts, suitable for switching loads. The thermal current Ith is up to 16 A, enabling high load capacity under continuous operating conditions.
Applications
This relay is intended for use in industrial control systems, particularly in installations where lamp loads are switched, for example, HQ lamps with parallel compensation. It can also be used as an input coupling relay to forward signals from sensors or other control devices to a PLC, or as an output coupling relay to transfer PLC outputs to loads such as motors or heaters. The design allows actuation via 2-wire initiators, with an allowable residual current ≤ 3 mA. The devices comply with EN 60947-5-1 and are therefore suitable for use in industrial installations.
Functions and Equipment in Detail
The relay features a manual actuation button on the front, which also serves as a switching position indicator. When energized, the button is pushed in; when de-energized, it retracts flush with the front edge. This feature enables visual monitoring of the switching state without additional measuring instruments. The contacts are actuated via a toggle arm with a plunger; when the excitation voltage drops, the arm is returned to its resting position by a spring. The contact configuration is designed for two changeover contacts, with contacts suitable for switching loads.
Technology Explained Simply
The relay coil is operated at AC 400 V 50 Hz. The protective circuit at the coil input safeguards against overvoltages that may occur due to sudden voltage spikes. The contacts are rated for a thermal current of up to 16 A, enabling high thermal load capacity during continuous operation. The width of 17.5 mm corresponds to the standard for installation distributors and allows compact mounting in enclosures. The contact configuration with two changeover contacts enables control of two independent loads or the implementation of switching circuits with interaction between multiple switching states.
Compatibility and Accessories
The device is suitable for use in systems with 2-wire initiators, with an allowable residual current ≤ 3 mA. It can be used in combination with PLC systems to transmit signals or control loads. The design allows use in installations where lamp loads with parallel compensation, such as HQ lamps, are switched. The devices comply with EN 60947-5-1, ensuring suitability for use in industrial installations.
Mounting and Installation
The relay is designed for mounting in installation distributors and is installed in standard switchboards or enclosures. The width of 17.5 mm allows for compact placement. The terminal connections are designed for wiring, with standardized terminal markings (A1/A2 for the coil, 11/12/14 etc. for contacts). The manual actuation button serves for manual activation of the contacts and visual state indication.
Advantages in Operation
The relay offers high thermal load capacity with an Ith of 16 A, ensuring reliable performance under continuous operating conditions. The integrated protective circuit at the coil input protects the device against overvoltages. The manual actuation button enables simple manual control and state monitoring. The design as an installation distributor device allows compact mounting in enclosures. Compliance with EN 60947-5-1 ensures suitability for use in industrial installations.