Further information for Dold 0054076 semiconductor contactor 3xAC 5A
Technical data
Approvals
UL
Load current up to
50 A
Load voltage up to
AC 480 V
Number of poles
1-pole, 2-pole, 3-pole
On/Off Input Control
AC/DC, DC
Width
22,5 mm, 45 mm, 90 mm
Type
BF 9250
Signalling output
Temperature monitoring
Variant
Auxiliary voltage
AC/DC 110 - 230 V
Contact equipping
with signal contact
Load current
3 x AC 5 A
Load voltage
AC 24 - 480 V
Semiconductor output
3-pole
Approvals and Markings
UL-listed C/US
Variant
Switching at zero crossing.
The Dold semiconductor contactor BF9250.03 is an electronic switching device for use in industrial and technical installations. It is designed for frequent and noiseless switching of loads such as heaters, motors, valves, and lighting. The device features a 3-pole semiconductor output and is designed for an auxiliary voltage of AC/DC 110 to 230 V. The load voltage is AC 24 to 480 V, and the load current is 3 x AC 5 A. Switching is zero-voltage switching, meaning the switching operation occurs at the zero crossing of the alternating voltage to minimize electrical interference and sparking. The device class complies with standards IEC/EN 60947-4-2 and IEC/EN 60947-4-3, which apply to semiconductor contactors.
Applications
The BF9250.03 is designed for use in installations where reliable, interference-free, and noiseless switching function is required. Typical applications include controlling electric heaters, drive motors, pneumatic or hydraulic valves, and lighting systems in production plants, building technology, or industrial machines. Zero-voltage switching reduces electromagnetic compatibility (EMC) and extends the service life of connected loads.
Functions and Equipment in Detail
The device is equipped with an alarm output, which can transmit signals for operating or fault conditions via a normally open contact (terminals 11/12). Additionally, integrated temperature monitoring protects the power semiconductors. In case of overheating, the switching operation is interrupted and the alarm output is activated. The monitoring can be reset by briefly interrupting the control voltage at A1/A2. Control is performed via the control input A1/A2, with an additional control input X1 available with low current consumption, suitable for control via a PLC (Programmable Logic Controller).
Technology Explained Simply
The semiconductor contactor operates based on power semiconductors that switch electrical loads without mechanical contacts. This eliminates mechanical wear, increasing service life and operational reliability. Switching occurs at the zero crossing of the alternating voltage, minimizing sparking and interference voltages. The integrated temperature monitoring ensures that the device is switched off in case of overheating of the semiconductor to prevent damage. Protection against overvoltage in the network is provided by varistors.
Compatibility and Accessories
The BF9250.03 is available in various versions, including 1-pole, 2-pole, and 3-pole variants. The width is 22.5 mm, 45 mm, or 90 mm, allowing flexible mounting on DIN rails. It is designed for load currents up to 50 A and load voltages up to AC 480 V. The UL-listed C/US certification confirms suitability for use in the USA and Canada. Control is via AC/DC or DC signals, with the low current consumption of the X1 input facilitating integration into existing control systems.
Mounting and Installation
The device is designed for mounting on a DIN rail, enabling quick and secure installation in enclosures. Connections are clearly labeled: L1, L2, L3 for mains connections, T1, T2, T3 for load outputs, A1/A2 for control voltage, and X1 for the optional control input. LED indicators (green for operating voltage, yellow for X1 control, red for temperature alarm) enable visual status monitoring.
Advantages in Operation
Operation of the BF9250.03 is particularly low-maintenance due to the absence of mechanical wear. Zero-voltage switching reduces electromagnetic interference and extends the service life of connected devices. The integrated temperature monitoring and alarm output increase operational safety and enable early fault detection. The low current consumption of the X1 input makes the device especially suitable for control via PLC systems. The UL-listed C/US certification ensures suitability for use in North American markets.