Dold 0053616, EAN: 4030641536169

Dold 0053616 voltage relay AC0,5-5V UH AC/DC24-80V

Dold 0053616 voltage relay AC0,5-5V UH AC/DC24-80V

Lieske Part No. 1002203
Mfg Part No 0053616
EAN-Code 4030641536169
Manufacturer Dold
Here only 325,64 EUR
387,51 EUR incl. VAT

Further information for Dold 0053616 voltage relay AC0,5-5V UH AC/DC24-80V

Technical data
1- / 3-phase1
Enclosure designSwitch cabinet
Nominal voltage max.AC 1000 V, DC 900 V
Output contacts2 C/O contacts
Width45 mm
TypeBA 9054
Operate delayYes
Variant
Auxiliary voltageAC/DC 24 - 80 V
Contact equipping2 changeover contacts
Measuring rangeAC 0,5 - 5 V
Start up delayWithout
Switching delay0 - 20 s
Approvals and MarkingsUKCA, CCC
VariantOvervoltage relay. Energized on trip. Time delay at setting value
The voltage relay BA9054/010 from Dold is an overvoltage relay of the VARIMETER series, designed for monitoring single-phase DC and AC voltage networks. It serves for early detection of voltage anomalies to prevent damage to electrical installations and enhance operational safety. The device operates on the principle of operating current and switches when the set threshold value is exceeded, with the switching delay adjustable between 0 and 20 seconds. Device settings are adjusted via rotary switches on the front panel, enabling user-friendly and precise adjustment.

Applications
This relay is designed for use in industrial and railway applications where reliable voltage monitoring is required. It monitors DC and AC voltages within the measurement range of AC 0.5 to 5 V. The galvanic isolation between auxiliary circuit and measurement circuit ensures safe and interference-free measurement. The maximum rated voltage is AC 1000 V and DC 900 V, with devices calibrated for sinusoidal AC voltages in RMS value.

Functions and Equipment in Detail
The device features two changeover contacts as output contacts, which can be used to control auxiliary circuits. The auxiliary voltage is supplied in the range of AC/DC 24 to 80 V. The switching delay activates after exceeding the set value and helps avoid false alarms due to short-term voltage fluctuations. The pickup delay is also integrated to ensure stable response to voltage changes. The hysteresis depends on the set value and ensures a defined reset voltage.

Technology Explained Simply
The relay measures the arithmetic mean of the rectified measurement voltage. Adjustment is made via rotary switches, allowing both the pickup value and the hysteresis value to be set. LED indicators signal operational readiness (green LED) and activation of the output relay (yellow LED). The module width is 45 mm, enabling installation in standard enclosures. The devices comply with IEC/EN 60255-1 and IEC/EN 60947-1 standards.

Compatibility and Accessories
The relay is suitable for use in industrial control systems and enclosures. It can be used as either an overvoltage or undervoltage relay, with the function determined by setting the threshold values. The galvanic isolation between measurement and auxiliary circuits enables safe integration into existing systems. The terminal connections are clearly labeled: A1/A2 for auxiliary voltage, e/f for voltage input, and contacts 11-14 and 21-24 for the two changeover contacts.

Mounting and Installation
Mounting is performed in an enclosure with a module width of 45 mm. The terminal connections are designed for wiring, with auxiliary voltage supplied via A1/A2. The measured voltage is connected to terminals e/f. Threshold values are adjusted via rotary switches on the front panel. The LED indicators provide visual feedback on the operational status.

Advantages in Operation
Early detection of voltage anomalies increases the availability of electrical installations. Precise and reliable measurement, along with galvanic isolation, ensures safe and interference-free operation. The integrated switching delay prevents false alarms during short-term voltage fluctuations. LED indicators facilitate diagnosis and maintenance. Compliance with IEC/EN 60255-1 and IEC/EN 60947-1 standards ensures adherence to required safety standards.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1002203
qrcode für Dold 0053616 voltage relay AC0,5-5V UH AC/DC24-80V