Further information for Dold 0053494 BN5983.53/104 DC110V emergency stop module
Technical data
1- / 2-channel
1, 2
Approvals
UL-Recognized
Cat. / PL acc. to EN ISO 13849-1
4/e
Connection
Pluggable screw terminals
Output contacts max.
1 NC contact, 3 NO contacts
SIL CL acc. to IEC/EN 62061
3
SIL acc. to IEC/EN 62061
3
Thermal current Ith max.
10 A
Width
100 mm
Type
BN 5983
Suited as safety gate monitor
Variant
Contact equipping
3 NO contacts, 1 NC contact
Nominal voltage
DC 110 V
Approvals and Markings
TÜV, CCC
Variant
For switching low loads
The Dold BN5983.53/104 DC110V is a safety relay from the SAFEMASTER series, specifically designed for use in emergency stop circuits and for monitoring sliding safety grilles. It serves as a protective function for personnel and machinery in industrial applications, particularly in systems that must operate according to safety standards. The device is configured as a emergency stop module and allows for 1- or 2-channel wiring, enabling flexible integration into various safety architectures. The nominal voltage is DC 110 V, and the module is designed for operation in safety-critical installations, with contact configuration consisting of 3 closers and 1 opener. This version is specifically suitable for switching small loads, for example, signals to a PLC.
Applications
This safety relay is used in machine and plant engineering where reliable shutdown in case of failure is required. It is particularly suitable as a safety door monitor to supervise access to hazardous areas. Applications also include monitoring sliding safety grilles, which must ensure a safe state when locked or opened. Integration into emergency stop circuits enables a safe response to emergency situations, with functions visually monitored via integrated LED indicators for supply voltage, channel 1, and channel 2.
Functions and Equipment in Detail
The device features removable screw terminals, enabling flexible and secure wiring. The terminal strips are designed to be easily removed and replaced, simplifying maintenance and installation. An integrated feedback circuit X3 – X4 allows monitoring of external contactors, enhancing system integrity. Additionally, overvoltage and short-circuit protection are integrated to protect the device from damage due to electrical disturbances. Contacts are optionally gold-plated, increasing reliability when switching small loads.
Technology Explained Simply
The safety relay operates according to functional safety standards. It meets Performance Level (PL) e and Category 4 as per EN ISO 13849-1, representing the highest requirement for safety functions in mechanical systems. Additionally, it complies with SIL 3 according to IEC/EN 62061, defining safety integrity for electrical, electronic, and programmable systems. The thermal current Ith max. is 10 A, describing the maximum load capacity of the contacts. The width of 100 mm allows mounting in standard control panels. Certifications TÜV, CCC, and UL-Recognized confirm compliance with international safety standards.
Compatibility and Accessories
The module is designed for use in safety-relevant control systems and can be combined with other components from the SAFEMASTER series. The 1- or 2-channel wiring allows adaptation to different safety requirements. Integrated LED indicators provide visual feedback on operating status, simplifying fault diagnosis. The connection technology with removable screw terminals is universally applicable and compatible with standard wiring techniques.
Mounting and Installation
Mounting is performed in standard control panels with a width of 100 mm. Removable terminals simplify installation and maintenance. Wiring is done via designated connection terminals, with feedback circuits X3–X4 used for monitoring external contactors. LED indicators allow for quick visual inspection of operating status. Adherence to safety instructions and intended use is essential for functional safety.
Advantages in Operation
The safety relay offers high reliability due to integrated protection functions and conformity with international safety standards. The 1- or 2-channel wiring enables flexible adaptation to different requirements. LED indicators and the feedback circuit increase transparency and diagnostic capability during operation. The width of 100 mm and removable terminals facilitate integration into existing control systems. Certifications TÜV, CCC, and UL-Recognized confirm suitability for use in various markets and applications.