Dold 0053477, EAN: 4030641534776

Dold 0053477 BL5903.22/00000 AC110V emergency stop module

Dold 0053477 BL5903.22/00000 AC110V emergency stop module

Lieske Part No. 1001978
Mfg Part No 0053477
EAN-Code 4030641534776
Manufacturer Dold
Here only 698,84 EUR
831,62 EUR incl. VAT

Further information for Dold 0053477 BL5903.22/00000 AC110V emergency stop module

Technical data
1- / 2-channel1, 2
Cat. / PL acc. to EN ISO 13849-14/e
ConnectionPluggable screw terminals
Output contacts max.3 NO contacts
SIL CL acc. to IEC/EN 620613
SIL acc. to IEC/EN 620613
Thermal current Ith max.5 A
Width90 mm
TypeBL 5903
Cross fault detectionYes
Variant
Contact equipping2 NO contacts, 1 NC contact as signal output
Nominal voltageAC 110 V
Approvals and MarkingsTÜV, UKCA
VariantFür 2-kanaligen Anschluß von einem Not-Aus-Taster
The Dold BL5903.22/00000 AC110V is a safety module for emergency stop functions in industrial systems, specifically designed for use in systems with automatic restart functionality after power failure. It is used, for example, in compressor controls, water and wastewater technology, where safe and reliable response to emergency stop actuations and power restoration is required. The device is configured as an emergency stop module and enables secure storage of the emergency stop actuation, ensuring that the system does not restart uncontrolled after a power failure if the emergency stop button was activated. Upon power restoration, the start function is automatically activated, provided the emergency stop button has not been pressed.

Applications
This module is intended for use in safety-critical systems, particularly in areas where uncontrolled restart after a power failure must be avoided. It is suitable for applications in process industry, water supply, wastewater treatment, as well as in machine and plant engineering, where the reliability of the emergency stop function is crucial. The design allows connection of an emergency stop button in a 2-channel configuration, providing higher safety through redundant signal detection.

Functions and Equipment in Detail
The device features a contact configuration with two normally closed contacts and one normally open contact serving as a signaling contact. The output contacts are designed for up to three normally closed contacts, enabling flexible integration into existing control systems. Cross-circuit detection ensures that faults such as short circuits between channels are detected and signaled. Additionally, line break and wire break detection is performed on all inputs to monitor connection integrity. The feedback loop enables external contact amplification, improving signal transmission in complex systems.

Technology Explained Simply
The module operates at a rated voltage of AC 110 V and is designed for industrial environments. The removable screw terminals facilitate installation and maintenance, as they can be removed and reinstalled without tools. Connection options include wires with cross-sections up to 2.5 mm² with sleeves according to DIN 46228-1/-2/-3/-4, enabling flexible wiring. The LED indicators for channel 1 and 2, as well as for fault diagnosis, provide visual feedback on operating status and simplify troubleshooting. The width of 90 mm allows mounting in standard enclosures.

Compatibility and Accessories
The module is designed for connection to an emergency stop button in a 2-channel configuration. It is compatible with systems requiring secure feedback of emergency stop actuation and automatic restart functionality after power failure. The safety functions comply with the requirements of standards EN ISO 13849-1 (Category 4, Performance Level e) and IEC/EN 62061 (SIL CL 3, SIL 3), confirming suitability for safety-critical applications. The certifications TÜV and UKCA confirm compliance with European and British safety standards.

Mounting and Installation
Mounting is performed in standard enclosures with a width of 90 mm. The removable screw terminals simplify wiring, allowing the use of wires with sleeves according to DIN 46228-1/-2/-3/-4 or 2.5 mm² wire with sleeve. The connection terminals are designed to ensure a secure and reliable connection. The LED indicators enable quick visual monitoring of operating status during installation.

Operational Advantages
The module provides high safety through redundant signal monitoring and fault detection. The automatic restart function after power failure reduces operational interruptions, provided no emergency stop was activated. The integrated diagnostic function with LED indicators and blink codes enables rapid identification of faults. The thermal current rating (Ith max.) of 5 A ensures safe operational reliability under load. The design is intended for industrial environments, with TÜV and UKCA certifications confirming compliance with safety requirements.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1001978
qrcode für Dold 0053477 BL5903.22/00000 AC110V emergency stop module