Further information for Dold 0053323 voltage relay AC0,5-5V UH AC230V
Technical data
1- / 3-phase
1
Enclosure design
Switch cabinet
Nominal voltage max.
AC 1000 V, DC 900 V
Output contacts
2 C/O contacts
Width
45 mm
Type
BA 9054
Operate delay
Variant
Auxiliary voltage
AC 230 V
Contact equipping
2 changeover contacts
Measuring range
AC 0,5 - 5 V
Start up delay
Without
Switching delay
0 - 20 s
Approvals and Markings
UKCA, CCC
Variant
Overvoltage relay. Energized on trip. Time delay at setting value
The voltage relay BA9054/010 AC0,5-5V UH AC230V from Dold is a voltage relay of the VARIMETER series, designed for monitoring single-phase DC and AC voltage networks. It is used for early detection of voltage anomalies to prevent damage to electrical installations and enhance operational safety. The device setting is adjusted via rotary switches on the front, enabling simple and user-friendly tuning of the pickup and drop-out values. The device operates on the operating current principle and is suitable for use in industrial and railway applications.
Applications
This relay is specifically designed for monitoring voltages in the range of AC 0.5 to 5 V. It can be used as either an overvoltage relay or an undervoltage relay, with the hysteresis depending on the set value. The galvanic isolation between the auxiliary circuit and the measurement circuit ensures safe and interference-free measurement. The application is in enclosures, where the width of 45 mm enables compact mounting.
Functions and Equipment in Detail
The device features 2 changeover contacts as output contacts, used for controlling external circuits. The auxiliary voltage is AC 230 V, ensuring standard power supply in industrial environments. The switching delay is 0 to 20 seconds and is activated once the set threshold is exceeded. This delay prevents false alarms caused by short-term voltage fluctuations. The pickup delay is also integrated to ensure stable response to voltage changes.
Technology Explained Simply
The relay measures the arithmetic mean of the rectified measurement voltage. For AC voltages, the device is calibrated to the RMS value. The measurement frequency can reach up to 5 kHz, enabling precise detection even during rapid voltage changes. The maximum rated voltage is AC 1000 V and DC 900 V, with the maximum permissible continuous voltage for the measurement range AC 0.5–5 V being 300 V. The internal resistance is 500 kΩ, ensuring high impedance and minimal load on the measurement point.
Compatibility and Accessories
The relay complies with IEC/EN 60255-1 and IEC/EN 60947-1 standards. UKCA and CCC certifications are available. It is designed for use in industrial installations, with galvanic isolation between the auxiliary and measurement circuits enabling safe integration into existing systems. The terminal connections are clearly labeled: A1/A2 for auxiliary voltage, e/f for voltage input, and contacts 11–14 and 21–24 for the two changeover contacts. LED indicators (green for operational readiness, yellow for activated output) support visual monitoring of the operating status.
Mounting and Installation
The device is intended for mounting in enclosures and conforms to the enclosure mounting form. The width of 45 mm allows for compact placement in standard control panels. The terminal connections are designed for secure and reliable connections. Adjustment is performed via rotary switches on the front, requiring no additional tools.
Operational Advantages
Early detection of voltage anomalies supports preventive maintenance, reducing failures and downtime. Precise and reliable measurement, along with integrated switching delay, enhances operational safety. LED indicators simplify diagnosis and fault localization. The device is designed for high overload capacity, ensuring robust performance under industrial conditions.