Further information for Dold 0053297 IK3070.95/00B DC24V coupling relay
Technical data
Enclosure design
Distribution board
Output contacts max.
2 C/O contacts
Thermal current Ith max.
8 A
Width
17,5 mm
Type
IK 3070
Initiator triggering
Suppressor circuit on the coil input
Variant
Contact equipping
1 Transistor
Nominal voltage
DC 24 V
Variant
Input circuit with MOV and LED as operating position display
The IK3070.95/00B DC24V coupling relay from Dold is an industrial coupling relay with a transistor output, used as an interface between control and power circuits. It serves for contact multiplication and enables potential separation in control systems. The device is designed for use in industrial electrical engineering and complies with the standards IEC/EN 60947-5-1. The width is 17.5 mm, making it suitable for installation in standard installation distributors.
Applications
This coupling relay is intended for applications where electrical separation between control and load circuits is required. It is frequently used in automation technology, in machine and plant construction industries, as well as in control systems where high switching frequency and reliability are required. The use of semiconductor outputs makes it particularly suitable for DC loads, where fast switching response and low residual voltage are important.
Functions and equipment in detail
The device features a transistor output designed for DC loads. The contact configuration includes a single transistor capable of switching up to 5 A. The switching voltage range is DC 0 to 30 V, with a nominal voltage of DC 24 V. The switching-on time is less than 2 ms, and the switching-off time is less than 18 ms. The residual voltage is less than 0.3 V, which enables efficient load control. The minimum load current is 1 mA, ensuring safe operation even at low loads.
Technology explained simply
The transistor output functions as an electronic switch activated by energizing the coil. The input circuitry includes a varistor (MOV) that limits overvoltages at the coil input, protecting the device from damage due to voltage spikes. A green LED serves as an operating status indicator and lights up when voltage is applied to the coil. The initiator control enables integration into control systems that use special control signals. The thermal current rating (Ith) is up to 8 A, ensuring long-term operational capability under load.
Compatibility and accessories
The coupling relay is part of a product family that also includes variants with relay and triac outputs. The different versions allow adaptation to various load types – DC or AC. The width of 17.5 mm enables installation in standard distribution boxes. The devices are certified according to IEC/EN 60947-5-1, ensuring compliance with safety and performance standards. The overvoltage category III and the rated impulse withstand voltage of 4 kV indicate high electrical strength.
Mounting and installation
The device is designed as an installation distributor and can be mounted in standard distribution boxes. The connection terminals are designed for direct connection to wires. The operating temperature range is from -20 °C to +55 °C, and the storage temperature range corresponds to the operating temperature range. The operating altitude is limited to a maximum of 2000 m above sea level. The creepage and clearance distances meet the requirements for a rated insulation voltage of 300 V.
Advantages in operation
The combination of transistor output, fast switching time, low residual voltage, and integrated overvoltage protection makes this coupling relay a reliable solution for demanding control tasks. The LED indicator enables visual monitoring of the operating status. The high mechanical life of at least 10 million switching operations and the electrical life of at least 250,000 switching operations at 3 A/AC 230 V ensure a long service life. The maximum permissible switching frequency is 10 operations per second, suitable for dynamic applications.