Further information for Dold 0053277 semiconductor contactor 3XAC 15A
Technical data
Approvals
UL
Load current up to
50 A
Load voltage up to
AC 480 V
Number of poles
1-pole, 2-pole, 3-pole
On/Off Input Control
DC
Width
45 mm, 67,5 mm, 112,5 mm
Type
BH 9250
Signalling output
Temperature monitoring
Variant
Auxiliary voltage
DC 24 V
Contact equipping
with signal contact
Load current
3 x AC 15 A
Load voltage
AC 24 - 480 V
Semiconductor output
3-pole
Approvals and Markings
UL-listed C/US
Variant
Switching at zero crossing. Control input X1 with low current consumption. Monitoring output for the temperature protection
The Dold semiconductor contactor type BH9250.03/001 UH=DC24V 3XAC 15A is an electronic switching device for controllable and noiseless switching of alternating current loads in industrial applications. It is referred to as a semiconductor contactor and is particularly used for frequent switching of heaters, motors, valves, and lighting systems. The device is zero-voltage switching, meaning the switching operation occurs precisely at the zero-crossing point of the alternating voltage to minimize current surges and electrical sparking. This feature is especially important for avoiding network disturbances and extending the service life of the loads.
Applications
This contactor is designed for use in industrial plants where reliable and maintenance-free switching technology is required. It is suitable for applications where mechanical relays or electromechanical contactors are no longer appropriate due to noise, wear, or limited switching frequency. The switching voltage ranges from AC 24 to 480 V, with the load current per pole reaching up to AC 15 A. The total power of the 3-pole device thus corresponds to 3 x AC 15 A. The maximum load voltage of AC 480 V makes it suitable for use in medium and higher voltage ranges, for example in manufacturing automation or building automation.
Functions and Equipment in Detail
The device features a control input X1, which operates with low current consumption and is therefore ideal for control via a PLC (Programmable Logic Controller) or other digital control devices. Control is performed via DC voltage, with the auxiliary voltage being DC 24 V. An integrated alarm output enables monitoring of the operating status. This output is activated when the temperature monitoring of the power semiconductor is triggered, enabling early fault detection and response. The temperature monitoring protects the semiconductor from overheating and extends the device’s service life.
Technology Explained Simply
Switching is performed via semiconductor components, which, unlike mechanical contacts, do not suffer from mechanical wear. The protection circuitry using varistors provides additional protection against voltage spikes and transient overvoltages that may originate from the network or the load itself. The width is 112.5 mm, matching the standard for DIN rail mounting. The device is snap-mounted onto DIN rail, enabling easy installation in enclosures. Switching occurs at zero voltage to minimize stress on the load and the network.
Compatibility and Accessories
The semiconductor contactor is available in various configurations, including 1-pole, 2-pole, and 3-pole versions. The width varies by model between 45 mm, 67.5 mm, and 112.5 mm. Approvals include UL listing C/US, enabling use in the USA and Canada. Conformity to standards is achieved according to IEC/EN 60947-4-2 and IEC/EN 60947-4-3, which define requirements for semiconductor contactors. The maximum load current can reach up to 50 A, with the current variant specified as 3 x AC 15 A.
Mounting and Installation
Mounting is done by snapping onto a DIN rail, allowing quick and secure installation in enclosures. Connections are clearly labeled: L1, L2, L3 for power supply connections, T1, T2, T3 for load outputs, A1/A2 for operating voltage, and X1 for the control input. Terminal labeling is detailed in the datasheet. Installation requires no additional tools, as terminals can be connected directly.
Operational Advantages
The device offers high switching frequency without mechanical wear, increasing service life and reducing maintenance costs. Noiseless switching is particularly advantageous in sensitive environments. The integrated temperature monitoring with alarm output enables proactive fault detection. Protection circuitry with varistors enhances reliability during operation. Control via DC voltage with low current consumption makes the device compatible with modern control systems such as PLC installations.