Dold 0053273, EAN: 4030641532734

Dold 0053273 semiconductor contactor 2xAC 15A

Dold 0053273 semiconductor contactor 2xAC 15A

Lieske Part No. 1001465
Mfg Part No 0053273
EAN-Code 4030641532734
Manufacturer Dold
Here only 269,56 EUR
320,78 EUR incl. VAT

Further information for Dold 0053273 semiconductor contactor 2xAC 15A

Technical data
ApprovalsUL
Load current up to50 A
Load voltage up toAC 480 V
Number of poles1-pole, 2-pole, 3-pole
On/Off Input ControlAC/DC, DC
Width22,5 mm, 45 mm, 90 mm
TypeBF 9250
Signalling outputYes
Temperature monitoringYes
Variant
Auxiliary voltageDC 24 V
Contact equippingwithout signal contact
Load current2 x AC 15 A
Load voltageAC 24 - 480 V
Semiconductor output2-pole
Approvals and MarkingsUL-listed C/US
VariantSwitching at zero crossing. 2 semiconductor contactors with separate control inputs in one housing
The Dold semiconductor contactor BF9250.92/003 UH=DC24V 2xAC 15A is an industrial power semiconductor switch designed for frequent and noiseless control of electrical loads in industrial plants. It is a 2-pole variant with a control voltage of DC 24 V and a load current capacity of 15 A per pole, with the load voltage ranging from AC 24 V to 480 V. The device is zero-voltage switching, meaning the switching operation occurs at the moment of the voltage zero-crossing of the alternating current, minimizing electrical sparking and voltage spikes. This feature is particularly advantageous for controlling inductive loads such as motors or heaters, as it increases the lifespan of both the loads and the switch itself.

Applications
This semiconductor contactor is intended for use in industrial control systems, particularly for controlling heaters, motors, valves, and lighting. Due to its noiseless switching function, it is especially suitable for applications where mechanical relays or electromechanical contactors are unsuitable due to noise or mechanical wear. The zero-voltage switching also reduces electromagnetic compatibility (EMC) and prevents interference in the surrounding environment.

Functions and Equipment in Detail
The device features two independent semiconductor contactors in one housing, each with its own control input. Control is achieved via a DC voltage of 24 V, with the control inputs designed for low current consumption, enabling direct control via programmable logic controllers (PLCs). The switching function is controlled by an internal zero-crossing detection circuit, ensuring switching occurs at the voltage zero point. Protection is provided by varistors, which suppress overvoltages in the network and extend the lifespan of the semiconductor components.

Technology Explained Simply
The technology is based on power semiconductors that function as electronic switches and have no moving parts. This eliminates mechanical wear, resulting in high lifespan and reliability. Zero-voltage switching minimizes sparking and voltage spikes, which is especially important for inductive loads. The device includes temperature monitoring to protect the power semiconductors from overheating and can optionally be equipped with an alarm output that activates in case of overheating. LED indicators (e.g., green LED for control signal, red LED for temperature alarm) allow visual monitoring of the operating status.

Compatibility and Accessories
The device is certified according to IEC/EN 60947-4-2 and IEC/EN 60947-4-3, ensuring compliance with safety and performance standards for electrical switching devices. It is UL-listed C/US, confirming approval for use in the USA and Canada. The width is 45 mm, making it suitable for mounting on a DIN rail. Other variants with 22.5 mm and 90 mm widths are available, but do not apply to this specific type. The load voltage reaches up to AC 480 V, and the maximum load current is 50 A, with this specific version providing 2 x AC 15 A.

Mounting and Installation
Mounting is done on a DIN rail, enabling quick and secure installation in enclosures. The connection terminals are clearly labeled (e.g., L1, L2, T1, T2, A1, A2, X1), simplifying installation and maintenance. The control inputs (A1/A2, X1) are designed for direct connection to PLC systems or other control devices. Power supply is via the control voltage DC 24 V.

Advantages in Operation
Operation of the semiconductor contactor is noiseless, improving the working environment and reducing maintenance. Zero-voltage switching extends the lifespan of both the loads and the device itself. Integrated temperature monitoring protects semiconductor components from thermal overload. The low current consumption of the control inputs allows direct control by PLC systems without additional amplifiers. Certifications according to IEC/EN and UL guarantee safety and reliability in industrial applications.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1001465
qrcode für Dold 0053273 semiconductor contactor 2xAC 15A