Dold 0053192, EAN: 4030641531928

Dold 0053192 current relay BA9053/012 AC0,5-5A AC230V 0-20S

Dold 0053192 current relay BA9053/012 AC0,5-5A AC230V 0-20S

Lieske Part No. 1002239
Mfg Part No 0053192
EAN-Code 4030641531928
Manufacturer Dold
Here only 255,64 EUR
304,21 EUR incl. VAT

Further information for Dold 0053192 current relay BA9053/012 AC0,5-5A AC230V 0-20S

Technical data
1- / 3-phase1
Enclosure designSwitch cabinet
Output contacts2 C/O contacts
Width45 mm
TypeBA 9053
Operate delayYes
Variant
Auxiliary voltageAC 230 V
Contact equipping2 changeover contacts
Measuring rangeAC 0,5 - 5 A
Start up delayWithout
Switching delay0 - 20 s
Approvals and MarkingsUKCA, CCC
VariantUndercurrent relay. De-energized on trip. Time delay at hysteresis value
The Dold current relay BA9053/012 is an undercurrent relay of the VARIMETER series, designed for monitoring single-phase AC networks. It operates on the residual current principle and switches when the set current value is undershot, with the switching delay becoming active from the hysteresis value. Device settings are adjusted via rotary switches on the front, enabling simple and user-friendly configuration. The relay is designed for use in enclosures and has a width of 45 mm, making it suitable for standard switchboards.

Applications
This relay is used to monitor the current consumption of electrical consumers in industrial and railway applications. It enables early detection of faults, supporting preventive maintenance and preventing failures in electrical systems. The application is particularly beneficial where continuous current monitoring is required to ensure operational safety and productivity.

Functions and Equipment in Detail
The device monitors the arithmetic mean value of the rectified measured current and is calibrated for sinusoidal AC currents in RMS value. The measurement range is AC 0.5 to 5 A. The auxiliary voltage is AC 230 V, with the auxiliary circuit and measurement circuit being galvanically separated. The contact configuration includes 2 changeover contacts, which can be used to control auxiliary circuits or warning signals. The switching delay is 0 to 20 seconds and is activated when the hysteresis value is undershot. The pickup delay is also integrated.

Technology Explained Simply
The relay measures the current via an internal measuring resistor (shunt) and reacts when the current falls below the set value. The hysteresis ensures that the relay does not trigger on minor fluctuations around the set value, but only when there is a clear undershoot. The switching delay prevents unwanted, short-term switching operations that could result from transient current behavior. The LED indicators signal operational readiness (green LED) and activation of the output relay (yellow LED).

Compatibility and Accessories
The relay is designed for use in single-phase systems and can be used both as an overcurrent relay and an undercurrent relay. It complies with standards IEC/EN 60255-1 and IEC/EN 60947-1. Certifications UKCA and CCC are available. It is suitable for measurement frequencies up to 5 kHz and features high overload capacity. The devices are designed for use in enclosures and can be mounted in standard switchboards.

Mounting and Installation
Mounting is done in enclosures using screw terminals. The connection terminals are clearly labeled: A1/A2 for auxiliary voltage, i/k for current input, and 11-14 as well as 21-24 for the two changeover contacts. Settings are adjusted via rotary switches on the front. The devices are designed for mounting in series, with maximum permissible currents varying depending on the model.

Advantages in Operation
Precise and reliable current monitoring enables quick fault localization and supports preventive maintenance. The integrated switching delay and galvanic separation between measurement and auxiliary circuits increase operational safety. The LED indicators provide a quick visual status overview. Compliance with standards IEC/EN 60255-1 and IEC/EN 60947-1 ensures reliability and safety in industrial applications.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1002239
qrcode für Dold 0053192 current relay BA9053/012 AC0,5-5A AC230V 0-20S