Dold 0051856, EAN: 4030641518561

Dold 0051856 semiconductor contactor 3xAC 5A

Dold 0051856 semiconductor contactor 3xAC 5A

Lieske Part No. 1001455
Mfg Part No 0051856
EAN-Code 4030641518561
Manufacturer Dold
Here only 301,62 EUR
358,93 EUR incl. VAT

Further information for Dold 0051856 semiconductor contactor 3xAC 5A

Technical data
ApprovalsUL
Load current up to50 A
Load voltage up toAC 480 V
Number of poles1-pole, 2-pole, 3-pole
On/Off Input ControlAC/DC, DC
Width22,5 mm, 45 mm, 90 mm
TypeBF 9250
Signalling outputYes
Temperature monitoringYes
Variant
Auxiliary voltageDC 24 V
Contact equippingwith signal contact
Load current3 x AC 5 A
Load voltageAC 24 - 480 V
Semiconductor output3-pole
Approvals and MarkingsUL-listed C/US
VariantSwitching at zero crossing. 3 semiconductor contactors with common ground for control inputs in one housing
The Dold semiconductor contactor BF9250.03/004 UH=DC24V 3xAC 5A is an electronic switching device for controllable and noiseless switching of alternating current loads. It is particularly used in industrial and technical applications for frequent switching of heaters, motors, valves, and lighting systems. The device operates on the principle of a semiconductor contactor and is designed as a 3-pole variant, integrating three separate semiconductor contactors in one housing. Control is achieved via an auxiliary voltage of DC 24 V, with the control inputs sharing a common ground. The load voltage is AC 24 to 480 V, and the load current is specified as 3 x AC 5 A. Switching is zero-voltage switching, meaning the switching operation occurs at the zero-crossing point of the alternating voltage to minimize electrical interference and sparking.

Applications include all uses requiring reliable, maintenance-free, and disturbance-free switching functions. The device is especially suitable for systems where mechanical relays or contactors cause wear and noise due to their moving parts. The temperature monitoring of the power semiconductor is integrated and protects the device against overheating. When a critical temperature is reached, an alarm output is activated, which can be used for indication or to control an external protection. Control is performed via a digital input that can process both AC/DC and DC voltages, enabling compatibility with PLC systems or other digital controls.

Technology explained simply is based on the use of semiconductor components that function as electronic switches. Unlike mechanical relays, there are no moving parts, which increases service life and eliminates noise. The protection circuitry using varistors ensures safe protection against overvoltage. The certification according to IEC/EN 60947-4-2 and IEC/EN 60947-4-3 ensures compliance with international standards for electrical switching devices. The UL-listed C/US certification confirms conformity with safety requirements in the USA and Canada. The width is 90 mm, allowing mounting on a DIN rail. The maximum load voltage of AC 480 V and the load current of 50 A (as a maximum value for the series) indicate a robust construction designed for demanding industrial applications.

Compatibility and accessories include use in systems requiring digital control via PLC or other control devices. The integrated LEDs (green for control signal, red for temperature alarm) provide visual status indication. Terminal markings (A1, A2, T1, T2, T3, 18, 11, 12, X1) are standardized, enabling clear assignment of functions. DIN rail mounting is standard, allowing flexible integration into enclosures and control systems. The temperature monitoring is an integrated function that signals via an alarm output (terminal 18) when the power semiconductor reaches a critical temperature.

Mounting and installation are performed by clipping onto a DIN rail, with terminals for mains and load connections as well as control inputs clearly labeled. Wiring follows the circuit diagrams shown in the datasheet, with zero-voltage switching and temperature monitoring already integrated in the device. The control supply voltage is DC 24 V, and the load terminals are rated for AC 24 to 480 V.

Operational advantages include high service life, noiseless switching, and low maintenance. Zero-voltage switching reduces electrical interference and extends the life of connected loads. Integrated temperature monitoring increases safety and prevents damage from overheating. Compatibility with PLC systems and DIN rail mounting simplifies integration into existing control architectures.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1001455
qrcode für Dold 0051856 semiconductor contactor 3xAC 5A