Further information for Dold 0051853 semiconductor contactor 3xAC 5A
Technical data
Approvals
UL
Load current up to
50 A
Load voltage up to
AC 480 V
Number of poles
1-pole, 2-pole, 3-pole
On/Off Input Control
AC/DC, DC
Width
22,5 mm, 45 mm, 90 mm
Type
BF 9250
Signalling output
Temperature monitoring
Variant
Auxiliary voltage
DC 24 V
Contact equipping
without signal contact
Load current
3 x AC 5 A
Load voltage
AC 24 - 480 V
Semiconductor output
3-pole
Approvals and Markings
UL-listed C/US
Variant
Switching at zero crossing. 3 semiconductor contactors with separate control inputs in one housing
The Dold semiconductor contactor BF9250.93/003 UH=DC24V 3xAC 5A is an electronic switching device for controllable and noiseless actuation of AC loads in industrial applications. It is particularly suitable for frequent switching of heaters, motors, valves, and lighting systems, with switching operations occurring at the zero crossing of voltage to minimize current surges and electrical interference. The device is designed as a 3-pole variant and features three independent semiconductor contactors in one housing, each controllable via separate control inputs. The auxiliary voltage is DC 24 V, making it suitable for actuation via PLC systems or other digital controls.
Applications
This semiconductor contactor is designed for use in industrial plants where reliable, maintenance-free, and interference-free switching functions are required. It is especially suitable for applications where mechanical relays or contactors would cause wear or noise due to their mechanical movements. The zero-voltage switching ensures gentle load actuation, extending the service life of connected devices. The maximum load voltage is AC 480 V, and the load current per pole is AC 5 A, which is sufficient for many standard applications.
Functions and Equipment in Detail
The device features protective circuitry using varistors to protect against overvoltage. Temperature monitoring of the power semiconductors is available as an option and can signal via an alarm output if the operating temperature is exceeded. This enables proactive fault detection and prevents thermal damage. Control is via digital inputs, with control input X1 having low current consumption, making it particularly suitable for PLC actuation. The width is 90 mm, allowing mounting on a DIN rail.
Technology Explained Simply
The semiconductor contactor operates using semiconductor components (e.g., thyristors or triacs) to switch electrical loads without mechanical contacts. Switching occurs at the zero crossing of alternating voltage, meaning the circuit is opened or closed whenever the voltage reaches zero. This minimizes spark formation, current surges, and electromagnetic interference. The integrated temperature monitoring monitors the heat development of the semiconductors and can activate an alarm output in case of overheating to trigger shutdown or warning.
Compatibility and Accessories
The device is compliant with IEC/EN 60947-4-2 and IEC/EN 60947-4-3 standards and carries UL certification C/US, enabling its use in various markets. It is available in various widths (22.5 mm, 45 mm, 90 mm), with the variant described here being 90 mm wide. Control is via DC 24 V, ensuring broad compatibility with modern control systems. Combination with other BF 9250 models is possible, especially when multiple independent switching functions are required in one device.
Mounting and Installation
The semiconductor contactor is designed for mounting on a DIN rail, enabling quick and secure installation in enclosures. Connections are clearly labeled (e.g., L1, L2, L3 for mains connection, T1, T2, T3 for load outputs, A1, A2, A3 for control inputs), making wiring simple and error-free. Power supply is via auxiliary voltage DC 24 V, supplied through connections A1/A2.
Advantages in Operation
Operation of the semiconductor contactor is noiseless and maintenance-free, as no mechanical contacts wear out. Zero-voltage switching reduces stress on connected loads and extends their service life. The integrated temperature monitoring enhances operational safety by warning of overheating. The low current consumption of control input X1 allows direct actuation by PLC systems without additional power supply units. UL certification and compliance with IEC/EN 60947-4-2/-4-3 standards guarantee reliability and safety in industrial use.